• Model NO.: AF-G1000
  • Certification: CE
  • Customized: Customized
  • Transmission Method: Machinery
  • Machine Color: as Require
  • Machine Weight: 4tons
  • Delivery Time: 30days
  • Cutting Type: Hydraulic
  • Type: Roof and Wall
  • Transport Package: Normal
  • Origin: Shanghai
  • Tile Type: Colored Steel
  • Condition: New
  • Usage: Roof
  • Product Name: Roof Tile Roll Forming Machine
  • Machine Size: 7.5m*1.4m*1.4m
  • Size of Container: 40gp
  • Control System: PLC
  • Driven Type: Chain
  • Trademark: Aofa
  • Specification: SGS
  • HS Code: 84552210
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine

1. Brif introduction
The machine has advantages of faster molding, higher productive capacity, and superior performance of finished product, conveniently operation and reliability.
1. PLC automatic control system, stability and easily for operation. Machine adoption hydropneumatic for pressing, it has higher production capacity.
2. Using cement and sand as the main raw material for production, with higher strength of finished product. The cement tile is perfectly used for house construction.
3. The machine can produce various kinds of tiles through changing mould, such as European tile, Flat tile, Bone tile, Edge tile and etc. And this machine can also produce different kinds of colorful floor tiles.

2. Working flow:
Decoiler----feeding-----roll forming-------cutting-----output table

3. Technical description:
A. Decoiler
Capacity(Max): 5MT
Coil width(Max. ): 1300mm

B. Roll forming system
1. Main motor power: 5.5kw
2. Drive: Chain
3. Main shaft dia: 76mm, material: 45#refined forge steel
4. Roller material: 45# forge steel, quenched treatment, chrome coated 0.05mm
5. Roll station: 14stations
6. Raw material: Color steel and galvanized steel
7. Thickness of raw material: 0.4-0.8mm
8. Width of material: 1250mm
9. Working speed: About 5m/min(Exclude punching time)
10. PLC: YASKAWA, made in Japan. 380V 50Hz(Depend on customer)11. Computer operating panel: Touching screen

C. Hydtraulic Cutting system
1. Hydraulic cutting
2. Hydraulic power: 5.5KW
3. Blade material: Cr12MOV, quenched 58° -62°
4. Working pressure: 20mpa

D. Control system
1. Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
2. Automatic length measurement
3. Automatic quantity measurement
4. Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved.
5. Length inaccuracy can be amended easily.
6. Control panel: Button-type switch and touch screen
7. Unit of length: Millimeter (switched on the control panel)

Machine Components
Name  Qty.
 Decoiler  1set
 Roll forming device  1set
 Cutting device  1set
 Control system  1set
 Output table  1set
 Oil pump  1set

1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine

Contact:

Abby Song
 
MOB: +86-18701854523
 
Websites: http://www.shafjx.com
 
         http://shaofa.en.alibaba.com

Homogenizer Machine

High-pressure homogenizer (high-pressure jet crusher) is a kind of equipment that uses physical methods to dynamically and continuously crush, disperse and emulsify fluid materials. The ultra-high pressure collision makes the flowable liquid material suspension, and the ultra-high pressure pump adjusted by the control system feeds the processed material into the high-pressure jet collider. After the high-pressure jet collider completes the collision, the pressure is released and ejected. The highest flow rate is 160-200 m/s, and high-pressure and high-speed impact occurs, so that the material reaches micron-level crushing, thereby completing the functions of ultra-fine crushing, emulsification and dispersion.

Cream Homogenization Machine,Toothpaste Homogenizer Machine,Peanut Paste Homogenization Machine,Food Homogenizing Machine

Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com