SOLAR WATER PUMP
Feature:
1. Each solar water pump is tested after 2-3 days, the test can be finished before the factory.
2.Each motor use intelligent winding machine wire to achieve zero error.
3.Ensure that every customer receives the installation, wiring instruction, professional staff to you.
Application:
Ground water supply to water works.
Irrigation in horticulture and agiculture.
Groundwater lowering.
Pressure boosting.
Industrial application.
Water treatment.
Â
Operation conditions:
Maximum fulid temperature: up to 35C
Maximum sand content: 0.25%
Maximum immersion: 80m
Minimum well diameter :3"
Construction characteristics pump
Stainless steel,ensuring resistance to corrosion,durability and a sturdy coupling to the motor.
The hexagonal pump shaft gurantees an effective impeller driving , A stainless steel non -return valve isfitted in the discharge to prevent any safeguarding impellers and diffusers ,the 4ST series pumps can be cuopled 4SD motors.
Motor:
For the motor characteristics ,pls check the relevant motor section.
Warranty :2years
Common questions answered:
1.Is this solar water pump dc brushless?
   Answer: Yes
2.What are the prices included?
  Answer: Pump and controller
3.Can we match solar panels?
  Answer:Yes, the pumps and solar panels need to be connected to the controller
4. Can the water pump connect directly to the solar panel?
  Answer: No, water pumps and solar panels need to be connected to the controller
5. Does the pump work at night?
  Answer: Work only when there is light in the day, and batteries for the night
6. Can the battery outlet match?
 Answer:Batteries are usually the customer's own match
Material:
| Components | Material |
| Pump external casing | AISI304SS |
| Delivery casing | Cast-Cu ASTM C85500 |
| Suction Lantern | Cast-Cu ASTM C85500 |
| Diffuser | Plastic.PC |
| Impeller | Plastic.POM |
| Shaft | AISI304SS |
| Shaft Coupling | AISI304SS |
| Wear Ring | AISI304SS |
| Motor external Casing | Cast-Cu ASTM C85500 |
| Top chock | Cast-Iron ASTM C85500 |
| Bottom support | AISI304SS |
| Mechanical seal | Special seal for deep well |
| Shaft | AISI304SS-ASTM 5140 |
| Bearing | NSK |
| Seal lubricant oil | Oil for food machinery and pharmaceutic use |
Performance Data:
| MODEL | P2 | DELIVERY N=2850 L/MIN | ||||||||||||
| 1-220-240V | 3-380-415V | KW | HP | Q | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 |
| 0 | 5 | 1.0 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | |||||
| 3SDM1.8/8 | 3SD1.8/8 | 0.18 | 0.25 | H | 35 | 34 | 34 | 33 | 32 | 29 | 26 | 22 | 17 | 11 |
| 3SDM1.8/11 | 3SD1.8/11 | 0.25 | 0.33 | 48 | 47 | 47 | 46 | 44 | 40 | 36 | 30 | 24 | 15 | |
| 3SDM1.8/15 | 3SD1.8/15 | 0.37 | 0.5 | 65 | 64 | 64 | 63 | 60 | 55 | 49 | 41 | 33 | 21 | |
| 3SDM1.8/21 | 3SD1.8/21 | 0.55 | 0.75 | 91 | 90 | 90 | 88 | 84 | 77 | 68 | 58 | 46 | 29 | |
| 3SDM1.8/27 | 3SD1.8/27 | 0.75 | 1 | 117 | 116 | 115 | 113 | 107 | 99 | 88 | 75 | 59 | 38 | |
| 3SDM1.8/33 | 3SD1.8/33 | 1.1 | 1.5 | 143 | 142 | 141 | 138 | 131 | 121 | 107 | 91 | 72 | 46 | |
| 3SDM1.8/39 | 3SD1.8/39 | 1.1 | 1.5 | 168 | 168 | 167 | 163 | 155 | 143 | 127 | 108 | 85 | 55 | |
| 3SDM1.8/47 | 3SD1.8/47 | 1.5 | 2 | 203 | 202 | 201 | 196 | 187 | 172 | 153 | 130 | 102 | 66 | |
For more details . pls contact with us !
The Multifunctional Hammer Mill is widely used in crushing various biomass wood waste and straw material. The motor and the hammers are directly connected by the coupling. There is no dead angle during the crushing so the finished product is very fine. The corners of the hammers are welded with high hardness material like carbon tungsten alloy. The welding layer thickness is around 3mm. The lifetime is 7- 8 times by normal 65Mn overall quenching hammer. The rotor has made the balance test and can work backward. It`s the best choice to prepare milled material for pellet machine.
Multifunctional Hammer Mill
Hammer Mill Machine,Wood Hammer Mill Machine,Multifunctional Hammer Mill,Multifunctional Hammer Mill
Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachinery.com