Model NO.: cooling tower filler
Noise Level: Low
Application Fields: Industrial
Certification: ISO, CTI
Condition: New
Trademark: newin
Transport Package: Woodencase 20gp/40gp Container
Specification: 750*800mm
Origin: China
HS Code: 8419909000
Model NO.: cooling tower filler
Noise Level: Low
Application Fields: Industrial
Certification: ISO, CTI
Condition: New
Trademark: newin
Transport Package: Woodencase 20gp/40gp Container
Specification: 750*800mm
Origin: China
HS Code: 8419909000
Liangchi Cross Fluted Cooling Tower PVC Fills. High quality PVC material ensures long service life.
Features
Adopts the design of thin film, to increase the cooling area and reduce the wind resistance.
Packing design uses half spherical surface concave and convex particles, particle orientation and consider the Angle of the air water membrane, so that the water along the heat dissipation of material surface vertical downward.
With advanced PVC plastic material after vacuum forming, fabrication and stable quality, not easy to brittle characteristics.Â
Filler used plate agglutination complete set type, each packing pills, all keeps the same spacing between airflow through
Specification
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Dimension: Â Â 750*800mm
           750*400mm
           750*1600mmÂ
           750*1000mmÂ
           750*1200mmÂ
           750*2000mm
Sheet space: 17.5mm
Sheet thickness: 0.3-0.6 mm (customized thickness available)
MOQ: 1000 pcs
Material: PVC, PP
Application: cross flow square type (box type) cooling tower
Physical and mechanical propertyÂ
PVC Plastic sheet(before molding) Physical and mechanical propertyÂ
| No. | Item | symbol | unit | symbol | test method | |
| 1 | density | Ï | g/cm3 | ≤1.55 | GB/T 1033 | |
| 2 | Heat the longitudinal shrinkage rate | S | % | ≤3.0 |  | |
| 3 | tensile strength | lengthways | σt | MPa | ≥42.0 | GB/T 13022 |
| crosswise | ≥38.0 | |||||
| 4 | elongation at break | lengthways | εt | % | ≥60 | GB/T 13022 |
| crosswise | ≥35 | |||||
| 5 | tear strength | lengthways | σtr | kN/m | ≥150 | GB/T 1130 |
| crosswise | ≥160 | |||||
| 6 | Folded in half Coldness Resistance Temperature |
ordinary type | tb | ºC | ≤-22 |  |
| Frigostabile type | ≤-35 | |||||
| *7 | Folded in half Coldness Resistance Temperature after hygrothermal aging |
ordinary type | tb (W·H) | ºC | ≤-8 |  |
| Frigostabile type | ≤-18 | |||||
| *8 | oxygen index | OI |   -- | ≥40 | GB/T 2406 | |
Â
PVC Plastic sheet(after molding) Physical and mechanical propertyÂ
| No. | Item | symbol | unit | symbol | test method | |
| 1 | density | Ï | g/cm3 | ≤1.55 | GB/T 1033 | |
| 2 | tensile strength | lengthways | σt | MPa | ≥42.0 | GB/T 13022 |
| crosswise | ≥38.0 | |||||
| 3 | tear strength | lengthways | σtr | kN/m | ≥150 | GB/T 1130 |
| crosswise | ≥160 | |||||
| 4 | Folded in half Coldness Resistance Temperature |
ordinary type | tb | ºC | ≤-8 |  |
| Frigostabile type | ≤-18 | |||||
| *5 | oxygen index | OI |   -- | ≥40 | GB/T 2406 | |
Cooling tower plastic parts code and standard
GB/T 1033-1986 plastic density and relative density experiment method
GB/T 1040-1992 plastic tensile performance test methods
GB/T 1633-1979 thermoplastic softening point (d) test method
GB/T 1843-1996 plastic cantilever beam impact test method
GB/T 2406-1993 plastic combustion performance test method, oxidation index
GB/T 13022-1991 plastic film tensile performance test methods
GB/T 1190-1991 plastic rectangular tear performance test methods
Liangchi Cross Fluted Cooling Tower PVC Fills. High quality PVC material ensures long service life.
Features
Adopts the design of thin film, to increase the cooling area and reduce the wind resistance.
Packing design uses half spherical surface concave and convex particles, particle orientation and consider the Angle of the air water membrane, so that the water along the heat dissipation of material surface vertical downward.
With advanced PVC plastic material after vacuum forming, fabrication and stable quality, not easy to brittle characteristics.Â
Filler used plate agglutination complete set type, each packing pills, all keeps the same spacing between airflow through
Specification
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Dimension: Â Â 750*800mm
           750*400mm
           750*1600mmÂ
           750*1000mmÂ
           750*1200mmÂ
           750*2000mm
Sheet space: 17.5mm
Sheet thickness: 0.3-0.6 mm (customized thickness available)
MOQ: 1000 pcs
Material: PVC, PP
Application: cross flow square type (box type) cooling tower
Physical and mechanical propertyÂ
PVC Plastic sheet(before molding) Physical and mechanical propertyÂ
| No. | Item | symbol | unit | symbol | test method | |
| 1 | density | Ï | g/cm3 | ≤1.55 | GB/T 1033 | |
| 2 | Heat the longitudinal shrinkage rate | S | % | ≤3.0 |  | |
| 3 | tensile strength | lengthways | σt | MPa | ≥42.0 | GB/T 13022 |
| crosswise | ≥38.0 | |||||
| 4 | elongation at break | lengthways | εt | % | ≥60 | GB/T 13022 |
| crosswise | ≥35 | |||||
| 5 | tear strength | lengthways | σtr | kN/m | ≥150 | GB/T 1130 |
| crosswise | ≥160 | |||||
| 6 | Folded in half Coldness Resistance Temperature |
ordinary type | tb | ºC | ≤-22 |  |
| Frigostabile type | ≤-35 | |||||
| *7 | Folded in half Coldness Resistance Temperature after hygrothermal aging |
ordinary type | tb (W·H) | ºC | ≤-8 |  |
| Frigostabile type | ≤-18 | |||||
| *8 | oxygen index | OI |   -- | ≥40 | GB/T 2406 | |
Â
PVC Plastic sheet(after molding) Physical and mechanical propertyÂ
| No. | Item | symbol | unit | symbol | test method | |
| 1 | density | Ï | g/cm3 | ≤1.55 | GB/T 1033 | |
| 2 | tensile strength | lengthways | σt | MPa | ≥42.0 | GB/T 13022 |
| crosswise | ≥38.0 | |||||
| 3 | tear strength | lengthways | σtr | kN/m | ≥150 | GB/T 1130 |
| crosswise | ≥160 | |||||
| 4 | Folded in half Coldness Resistance Temperature |
ordinary type | tb | ºC | ≤-8 |  |
| Frigostabile type | ≤-18 | |||||
| *5 | oxygen index | OI |   -- | ≥40 | GB/T 2406 | |
Cooling tower plastic parts code and standard
GB/T 1033-1986 plastic density and relative density experiment method
GB/T 1040-1992 plastic tensile performance test methods
GB/T 1633-1979 thermoplastic softening point (d) test method
GB/T 1843-1996 plastic cantilever beam impact test method
GB/T 2406-1993 plastic combustion performance test method, oxidation index
GB/T 13022-1991 plastic film tensile performance test methods
GB/T 1190-1991 plastic rectangular tear performance test methods
CNC Parts,CNC Machining Parts,Custom Machined Parts,CNC Machine Spare Parts
Grand Nakamura Mechanical and Electrical (Suzhou) Co., Ltd. , https://www.gns-mp.com