Yunnan Copper stated in a statement on Wednesday that the company will close three copper blast furnaces and carry out planned maintenance. Repairs will begin on September 1 for nine months. The company said that the production of refined copper and sulfuric acid will be affected, but the operation of other systems will not be affected. The company also stated that it will be able to complete this year's production target, but did not provide more details. Yunnan Copper is the fourth largest copper producer in China based on output.

Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Continuous Waste Tyre Pyrolysis Plant

Flowchat of Continuous Waste Tyre Pyrolysis Plant

Continuous Waste Tyre Pyrolysis Plant

Advantages of Continuous Waste Tyre Pyrolysis Plant

 1.  Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

                  2.  Auto-loading, auto-discharging and oil coming out at the same time;

                  3.  Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

                  4.  Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

                 5.  High efficiency condensers, more oil output, good quality oil, easy to clean.

                 6.  Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

                7.  National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

               8.  Easy to operate, need less manpower.

 

Technical Parameter of Continuous Waste Tyre Pyrolysis Plant

          

NO.

ITEM

Technical Parameter

1

Suitable Raw Materials

Small pieces of Waste tyre,rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully Automatic Feeding and Discharging under High Temperature at Same Time

5

Capacity(24h)

8-20Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

  Hot Air

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

Shipment

5*40HC

19

Delivery time

≤70Days

 

 

 

 

 

 

Continuous Waste Tyre Pyrolysis Plant

Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl