The machine is a kind of electric tensile tester which adopts the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically on micro computer or host computer.
Â
Application:
Testing Equipment is used to test strength tension, compression, shearing force, adhesion, peeling force, tear strength and other force of specimen, semiproduct and finished product in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, petrochemistry, electric appliance, automobile,...etc. , which are the basic facilities for input quality control (I.Q.C), Quality Control (Q.C.), Physical Inspection, Mechanics Research and Material Development.
Â
Features:
1. a variety of measurement units, Measure In Imperial & Metric are switchable;
2. the software interface with three languages in Simplified Chinese, Traditional Chinese and English, which can be switched easily
3. The pattern of Test reports can be self -designated; test data can be displayed directly in the main screen;
4. User-defined Test methods; with experimental data analysis function;
5. a single-screen operation; do not need to switch the screen.
6. comparative mode at the same time to make a number of curve data comparison;
7. High quality, accurate and reliable models with competitive price.
8. Motor system: Panasonic servo motor +Panasonic servo driver +ball screw (Taiwan) +Leeming reduction gears +synchronous belt driver;
9. Computer servo system :Desktop computer servo control tensile tester dedicated
10. Windows interface to test software it can achieve to set speed, load, power time, Breakpoint proportion, more order control mode and meet different test requirement.
11. Displacement resolution: 0.001mm
12. Safety device: overload emergency stop device, fluctuation travel limit device, leakage automatic broken electricity system, automatic breakpoint stop function.
Â
Technical parameters:
| Â Capacity | Â 500N, 1KN, 2KN, 5KN, 10KN, 20KN (optional) |
|  Units |  gf, kgf, N, LBf, W, kN, T |
| Â Load Resolution | Â 1/250, 000 |
|  Load Accuracy |  within ± 0.5% |
| Â Maximum trip | Â 1000mm (excluding fixture) |
|  Test  speed |  (0.1-500)mm/min |
|  Outside Dimension(L× W× H) |  985× 510× 1600mm |
| Â Weight | Â 70~150kg |
| Â Power | Â 1 phase, 220V/50HZ |
| Â Motor | Â Servo Motor, frequency conversion motor |
| Â Driver | Â High presice ball screw |
|  Accessory | One set of standard fixture for tension fixture, one computer |
| Fixtures type | Different fixture can be customized |
CORE PARTS:
Â
Â
Deep Stamping Products, it can also be called Deep Metal Stamping Parts, Deep Processing Metal Stamping Parts, or Deep Processing Stamping Parts.
The die used for stamping is called a stamping die, or stamping dies for short. A die is a special tool that processes materials (metal or nonmetal) into the desired parts in bulk. A stamping die is very important in stamping, without meeting the requirements of a stamping die, batch stamping production is difficult to carry out; Without advanced stamping die, the advanced stamping process can not be realized. The stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping processing, only they can be combined with each other to get stamping parts.
Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet metal stamping or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material-forming engineering technology.
Dongjie can produce stamping parts according to your drawings. Dongjie has more than 1500+ sets of molds and has a professional technical and design team. We can meet your requirements as much as possible. You are welcome to come to consult your drawings.
Stamping Parts,Metal Stamping Parts,Drawing Metal Stamping Parts,Carbon Steel Metal Stamping Parts
Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com