Free float steam traps is currently one of the most advanced steam traps, product quality and manufacturing technology to reach the international level of similar products. Due to the high precision ball float, to ensure the sealing performance of the trap, the entire spherical surface can be sealed, long service life.

Free float steam trap unique advantages:

CS41H automatic free float steam trap is the selection of built-in exhaust valve, very sensitive, high-quality work, can extend the free float steam trap's overall service life. The biggest advantage of free float steam trap is not affected by the pressure, temperature, the impact of fluctuations in the flow of condensate water, continuous drainage, water row, the minimum undercooling 0 ℃, the heating equipment to achieve the best efficiency; it The minimum working pressure 0.01Mpa, the maximum back pressure ≤ 85%. Free float steam trap is petroleum, chemical, printing and dyeing, pharmaceutical, paper, food and other industrial heating equipment the best trap.

Free float steam trap specifications and technical parameters:

Nominal diameter (DN): 15-150; Nominal pressure (PN): 1.6-4.0 Mpa;

Maximum working pressure (PMO): 0.2-1.6 Mpa; Maximum operating temperature (TMO): 350 ℃;

Working medium: steam condensate water; no-load leakage rate of less than 3%; degree of supercooling 0.5%

CS41H automatic free float trap

CS41H automatic free float steam trap models, specifications, dimensions table

Free float steam trap works:

The structure of the free float steam trap is simple, there is only a fine ground stainless steel hollow float inside, both float and opening and closing pieces, non-wearing parts, long service life. When the device is started, air and low temperature condensate will appear in the pipe. Manual air venting valve can quickly remove the non-condensable gas, the trap starts to work, the low temperature condensate flows into the trap, the level of condensate rises, the float rises, Open the valve. The device will raise the temperature quickly, the automatic air venting valve will be closed before the temperature in the pipeline rises to the saturation temperature; the device enters the normal operation condition, the condensate water decreases, the liquid level drops, the float ball moves with the liquid level to adjust the valve hole flow rate; Stop entering, the ball flows with the media approaching the valve seat, close the valve. Free float steam trap valve seat is always below the level to form a water seal, no steam leaks.

【Print】 【Close】

High Precision Edm Wire Cutting Machine

High Precision Edm Wire Cutting Machine,Edm Wire Cutting Machine,Electrical Discharge Machining,Wire Electrical Discharge Machining

Taizhou Jiangzhou CNC Machine Tool Manufacturing Co.,Ltd , https://www.jzcncmachine.com