Custom 316 Stainless Steel Special Nuts & Fitting

We supply custom metal parts for electornics through metal injection molding process . 

Metal injection molding is an effective way for the high-volume production of small metal parts
( from0.1g to200g ), such as stainless steel parts. The parts with metal injection molding process may be geometrically complex , thin walls and fine details.

The use of metal powders enables a wide variety of ferrous and non ferrous alloys to be used and for the material properties ( hardness , strength , wear resistance, corrosion resistance ) to be close to the wrought metals. And also because the metal is not melted in the MIM process (unlike metal casting and machining process), high temperature alloys can be used without any negative affect on tool life.

Advantages of MIM process

1. Simple & complex geomitries avaialbe
2. Efficient use material then lower the cost
3. Excellent mechanical properties
4. Tailored solutions to meet the flexible design
5. High-efficient volume production  
6. Repeatable use
7. A green way for production

 
Custom parts







Workshop


  We supply custom metal parts for electornics through metal injection molding process . 

Metal injection molding is an effective way for the high-volume production of small metal parts
( from0.1g to200g ), such as stainless steel parts. The parts with metal injection molding process may be geometrically complex , thin walls and fine details.

The use of metal powders enables a wide variety of ferrous and non ferrous alloys to be used and for the material properties ( hardness , strength , wear resistance, corrosion resistance ) to be close to the wrought metals. And also because the metal is not melted in the MIM process (unlike metal casting and machining process), high temperature alloys can be used without any negative affect on tool life.

Advantages of MIM process

1. Simple & complex geomitries avaialbe
2. Efficient use material then lower the cost
3. Excellent mechanical properties
4. Tailored solutions to meet the flexible design
5. High-efficient volume production  
6. Repeatable use
7. A green way for production

 
Custom parts







Workshop


 

Laser Welded Finned Tube

Fings type: laser welded fin tube
Base pipe material: steel, aluminum, copper, titanium, etc
Heat material: copper, aluminum
Wender tube length: unlimited
Product Description: 100% welded between fin and tube without filling material.The laser welding in the weld.

Pipe outer diameter 8.0-50.0 mm Wing outer diameter 17.0-80.0 mm wing pitch 5-13 fins / inch wing height 5.0-17 mm fin thickness 0.4 1.0 mm maximum pipe length 12.0 m.

usually,Squeeze wings Utend Power plant, chemical industry, heat recovery plant, thermal industry

The maximum operating temperature is 400 C.

Stainless Steel Welded Pipe,Stainless Steel Welded Pipes,Spiral Welding Pipe,Welded Spiral Pipe

Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com