First, the electromagnetic flowmeter structure The electromagnetic flowmeter's structure mainly by the magnetic circuit system, the measurement catheter, the electrode, the shell, the lining and the converter and so on the composition.
Second, the principle of electromagnetic flowmeter
1. Magnetic flowmeter magnetic circuit system: Its role is to produce a uniform DC or AC magnetic field. The DC magnetic circuit is realized by a permanent magnet. The advantage is that the structure is relatively simple and less disturbed by the AC magnetic field, but it is easy to polarize the electrolyte liquid in the measurement conduit so that the positive electrode is surrounded by negative ions and the negative electrode is positive ions. Enveloping, that is, the polarization phenomenon of the electrode, and the internal resistance of the two electrodes will increase, which will seriously affect the normal operation of the instrument. When the pipe diameter is larger, the permanent magnet is also relatively large, heavy and uneconomical, so the electromagnetic flowmeter generally uses an alternating magnetic field, and is generated by 50HZ power frequency power supply excitation.
2, electromagnetic flowmeter measuring catheter: Its role is to allow the measured conductive liquid through. In order to make the magnetic flux to be diverted or short-circuited when passing through the measuring tube, the measuring tube must be made of non-magnetic material, low conductivity, low thermal conductivity, and a certain mechanical strength. Stainless steel, glass fiber reinforced plastic, high strength without magnetic permeability Plastic, aluminum and so on.
3, electromagnetic flowmeter electrode: Its role is to lead out and be measured in proportion to the induced potential signal. The electrodes are generally made of non-magnetic stainless steel and are required to be flush with the lining so that the fluid passes unimpeded. Its installation position should be in the vertical direction of the pipeline to prevent deposits from accumulating on it and affect the measurement accuracy.
4. Magnetic flowmeter lining: There is a complete electrical insulating lining on the inside of the measuring conduit and the flange sealing surface. It is in direct contact with the liquid to be measured. Its role is to increase the corrosion resistance of the measuring tube and prevent the induced potential from being short-circuited by the metal measuring tube wall. Lining materials are mostly corrosion-resistant, high-temperature resistant, wear-resistant polytetrafluoroethylene plastics, ceramics and so on.
5, electromagnetic flowmeter converter: The induced potential signal generated by the liquid flow is very weak, affected by a variety of interference factors, the role of the converter is to amplify and convert the induced potential signal into a unified standard signal and suppress the main Interference signal. Its task is to amplify the induced potential signal Ex detected by the electrode into a uniform standard DC signal.

Metal Frame Wiper Blade

Unlike traditional windshield wipers, the boneless windshield wipers do not have the support of the skeleton. Instead, they are assembled with 4 parts including wiper strips, boneless wiper blades, wiper sheaths, and plastic parts. Under this design, not only the wiper is more flexible, compared with the traditional wiper, the force and wear are more uniform, which can achieve a better wiping effect, and it also further improves the driving safety.

Window Wipers,Piaa Wiper Blades,Windshield Wiper Replacement,Windshield Wiper Blades

Taishan Yuanjin Auto Parts CO., LTD , https://www.yuanjinautoparts.com