2)Energy and convenient
3)China best
4)Price reasonable
5)used widly
This type of equipment is mainly used to select wet weak magnetic field and remove the strongly magnetic minerals of fine grains. They are widely used in mineral processing industry, coal washing industry, chemical industry, etc, e. G. Recycle heavy formulas such as magnetic heavy media during heavy media separation, concentrate low-concentration slurry in iron ore and gather magnetic steel minerals, treat ore feeding from high-intensity magnetic separators, remove magnetic or weakly magnetic ores and coenobium, as well as prevent blockage of magnetic media.
During wet magnetic separation, to get pure magnetic minerals, downstream magnetic separators are usually selected. In such case, the recovery ratio of magnetic minerals might be reduced. If the magnetic minerals are required to be recycled to the largest extent, counter-current magnetic separators shall be selected. In this case, the grade of magnetic minerals might be reduced. If both the grade and recovery rate of magnetic minerals shall be taken into account, semi-countercurrent magnetic separators might be more appropriate. 1)High quaility
2)Energy and convenient
3)China best
4)Price reasonable
5)used widly
This type of equipment is mainly used to select wet weak magnetic field and remove the strongly magnetic minerals of fine grains. They are widely used in mineral processing industry, coal washing industry, chemical industry, etc, e. G. Recycle heavy formulas such as magnetic heavy media during heavy media separation, concentrate low-concentration slurry in iron ore and gather magnetic steel minerals, treat ore feeding from high-intensity magnetic separators, remove magnetic or weakly magnetic ores and coenobium, as well as prevent blockage of magnetic media.
During wet magnetic separation, to get pure magnetic minerals, downstream magnetic separators are usually selected. In such case, the recovery ratio of magnetic minerals might be reduced. If the magnetic minerals are required to be recycled to the largest extent, counter-current magnetic separators shall be selected. In this case, the grade of magnetic minerals might be reduced. If both the grade and recovery rate of magnetic minerals shall be taken into account, semi-countercurrent magnetic separators might be more appropriate.
Overview:
SKFJX Single-wheel lapping and polishing machines are versatile precision machines designed to produce lapping / polishing flat surfaces in high degree of flatness of and surface finish with absolute uniformity on all types of hard and soft materials.Best to suit high degree of Flatness & Surface Finish.
SKFJX Single-wheel lapping and polishing machines are used for small to large size work pieces. Production of these parts can be achieved from small quantities to high volume production. All machines are equipped with digital control and monitoring electronics.
Working principle:
The conditioning rings or carriers locate in plate and also rotate freely
The parts kept freely inside conditioning rings or carriers with the surface to be lapped mating the Lapping Plate.
The sharp abrasive particles which are continuously fed on the machine plate get impregnated in the Lapping plate and cut the material from the parts surface and creates replica of the plates flatness on to the same.
DM1200 Single Side Lapping Machine
DM1200 Single Side Lapping Machine,Flat Face Polishing Machine,Single-sided Lapping Machine,Lapping Polishing Machine
Xinxiang SKF machinery Co., Ltd. , https://www.facegrindingmachine.com