Industrial waste water treatment stainless steel stacked sludge dewatering machine
1.Suitable for sludge dewatering of high/low consistency.
2.There is no need to worry about jam up. Reduce the cleaning water consumption.
3.The electrical cabinet, disposal tank and dehydrator are integrated, which reduces the covering area and brings convenience to installment.
4.The dehydrator is enclosed working, which reduces the bad smell and improves the working environment.
5.Automatically working for 24 hours, reducing the labor strength of workers.
6.The slow running speed of screw shaft reduces the power consumption and noise.
7. It is made with stainless, extending the service life.
8. It is convenient for daily maintenance.
The main part of the dehydrator is a filter device that a screw runs through the stacked fixed rings and moving ring.
The small gaps between fixed rings and moving ring can filter the sludge, and the lumenbetween screw and rings is filled with polymer grains.
The moving ring transfers the sludge to the end of the machine with pressure and extrudes sludge cakes.
The running of the screw drives the moving ring to clean the gaps and avoid jam.
Product Application
•City mixed raw sewage
•Food & beverage industry
•Chemical industry
•Stone & mine sewage
•Leather & tannery sewage
•Paper & pulp sewage
•Elecro-plating sewage
•Pringting & dyeing sewage
•Power plant
•Petrochemical industry
Selection of models
Â
| Model | Ds Standard Treating Capacity | Sludge Flow | ||||||||
| Low→high consistency | 2000mg/L | 5000mg/L | 10000mg/L | 20000mg/L | 25000mg/L | 50000mg/L | ||||
| QLD101 | ≈3kg/h | ≈5kg/h | ≈1.5m³/h | ≈0.6m³/h | ≈0.5m³/h | ≈0.25m³/h | ≈0.2m³/h | ≈0.1m³/h | ||
| QLD131 | ≈5kg/h | ≈10kg/h | ≈2.5m³/h | ≈2m³/h | ≈1m³/h | ≈0.5m³/h | ≈0.4m³/h | ≈0.2m³/h | ||
| QLD132 | ≈10kg/h | ≈20kg/h | ≈5m³/h | ≈4m³/h | ≈2m³/h | ≈1m³/h | ≈0.8m³/h | ≈0.4m³/h | ||
| QLD201 | ≈6kg/h | ≈18kg/h | ≈4.5m³/h | ≈1.8m³/h | ≈1.5m³/h | ≈0.75m³/h | ≈0.6m³/h | ≈0.3m³/h | ||
| QLD202 | ≈18kg/h | ≈30kg/h | ≈9m³/h | ≈3.6m³/h | ≈3m³/h | ≈1.5m³/h | ≈1.2m³/h | ≈0.6m³/h | ||
| QLD301 | ≈30kg/h | ≈50kg/h | ≈15m³/h | ≈6m³/h | ≈5m³/h | ≈2.5m³/h | ≈2m³/h | ≈1m³/h | ||
| QLD302 | ≈60kg/h | ≈100kg/h | ≈30m³/h | ≈12m³/h | ≈10m³/h | ≈5m³/h | ≈4m³/h | ≈2m³/h | ||
| QLD303 | ≈90kg/h | ≈150kg/h | ≈45m³/h | ≈18m³/h | ≈15m³/h | ≈7.5m³/h | ≈6m³/h | ≈3m³/h | ||
| QLD304 | ≈100kg/h | ≈200kg/h | ≈50m³/h | ≈10m³/h | ≈20m³/h | ≈10m³/h | ≈8m³/h | ≈4m³/h | ||
| QLD352 | ≈120kg/h | ≈200kg/h | ≈60m³/h | ≈24m³/h | ≈20m³/h | ≈10m³/h | ≈8m³/h | ≈4m³/h | ||
| QLD353 | ≈180kg/h | ≈300kg/h | ≈90m³/h | ≈36m³/h | ≈30m³/h | ≈15m³/h | ≈12m³/h | ≈6m³/h | ||
*DS Standard Capacity=Sludge flow*Sludge Consistency(DS refers to Dried Sludge)
Specifications
| Model | Screw Axis Specification | Outlet Position(ground distance)(mm) | Dimensions(mm) | Net weight | Operating Weight | |||
| Length | Wide | Height | ||||||
| QLD101 | Ø100×1 | 215 | 1816 | 756 | 1040 | 190kg | 280kg | |
| QLD131 | Ø130×1 | 215 | 1816 | 756 | 1040 | 220kg | 320kg | |
| QLD132 | Ø130×2 | 215 | 1816 | 856 | 1040 | 300kg | 410kg | |
| QLD201 | Ø200×1 | 350 | 2300 | 785 | 1270 | 375kg | 520kg | |
| QLD202 | Ø200×2 | 350 | 2500 | 935 | 1270 | 470kg | 680kg | |
| QLD301 | Ø300×1 | 495 | 3255 | 985 | 1600 | 820kg | 1230kg | |
| QLD302 | Ø300×2 | 495 | 3455 | 1295 | 1600 | 1350kg | 2050kg | |
| QLD303 | Ø300×3 | 495 | 3605 | 1690 | 1600 | 1820kg | 2810kg | |
| QLD304 | Ø300×4 | 495 | 3605 | 2150 | 1600 | 2350kg | 3750kg | |
| QLD352 | Ø350×2 | 585 | 4140 | 1550 | 2250 | 2450kg | 3400kg | |
| QLD353 | Ø350×3 | 585 | 4420 | 2110 | 2250 | 3350kg | 4850kg | |
*Note:Shanghai QILEE has the right to revise the specification.
Operation Conditions
| Model | Power Consumption(kw) | Water Pressure for Cleaning | Water Demand for Cleaning(L/h) | Maintenance Period | Replace Period for Wearing Parts(year) | ||||||||
| Screw Axis | Agiator | Total | Screw Axis | Moving Ring | |||||||||
| QLD101 | 0.1 | 0.1 | 0.2 | 01Kpa-0.2Kpa | 24 | 5min/day |
The movement of a tumbler screening machine is usually compared with simple hand screening similar to the [gold washing pan". Basic rotary motion is similar to hand screening. The eccentricity is adjustable from 25 to 40mm, low speed V belt drive is adjustable from 120 to 360rpm. Each product` dwell time can be adjusted in a radial and tangential angle, towards the drive axis.Therefore, establishing the horizontal and throwing three dimensional rolling movement, materials are evenly dispersed on the entire sieve surface from the center to the outer edge, and thus spread towards the axis by spiral movement. Small particles are then finished in the whole sieving process. The horizontal and vertical acceleration are increased with the movement of the particles, and then the particles which are close to mesh size will be successfully separated; The larger particles are transported to the exit, the flow can be controlled by a regulated oriented device at the exit, the oriented device is another factor which controls the dwell time of the materials.
Feature *No vibration when working(best choice for fragile materials, such as salt,sugar,yeast,etc.) *Capacity is about 4 times compared with S49-B series Vibrating Screen *Price is much higher compared with S49-B series vibrating screen *Diameter up to 2600mm *Screening efficiency up to 96% *Noise less than 70 dB * Six level separation
Application
Chemical, food and spices, plastics, mining, medicine, wood and plywood, metallurgy, rubber, fodder, fertilizer, sugar, salt, renewable industry.
Warranty
Our machines have an automatic 12 months guarantee against faulty material and workmanship valid from the date of dispatch in China or date of arrival at foreign border.
If any problem of the machine under instruction within one year,we are responsible for replacement incuding delivery fee and maintenance. Lifelong service is offered with cost charge after one year.
Tumbler Sieve,Tumbler Sifter,Tumbler Vibrating Sieve,Circular Tumbler Sieve XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl | ||||||
