FKM EPDM HNBR Rubber Seals for Assisted Nipple

FKM EPDM HNBR rubber seals for Assisted nipple in oil and gas industry

Our factory can make all kind of rubber seal / rubber part for oil and gas industry.
Please contact me if you need this demend.

High Temperature Resistant Viton O Ring / FKM O ring / FPM O ring
FKM Material Data:
Name: Fluorous Rubber (Viton; FPM; FKM)
SHORE Hardness: 65~90
Trait: High temperature resistant, wear resistance, oil resistance, ageing resistance, corrosion resistance
Temperature resistant: 200° ~250° The highest temperature is up to 300°
Raw materials through the ROSH authentication!
USE: This product is suitable for all kinds of mechanical equipment installed in the, in the provision of temperature, pressure and different liquid and gas medium, in fixed or sports mode on sealing function.
Viton has excellent resistance to high temperatures, ozone, weather, oxygen, mineral oil, fuels, hydraulic fluids, aromatics and many solvents, and therefore used for orings and cord. Fluorocarbon possesses low gas permeability, low compression set, and good mechanical properties.
 
Basic Temperature Service Range: -20°C to 205°C (Short periods up to 230°C).
 
There are many different types of Viton, used for both Viton oring and Viton cord. Please use this compatibility chart as a guide to choose the correct type for your application.
 
Additionally we are able to supply Viton / FKM which meets the requirements of FDA CFR title 21, section 177.2600 - compound is V75/FDA.
 
Application of Viton O ring / FKM o ring / FPM o ring
In typical applications, O-rings come into contact with: Chemicals, Heat, Fuels, Di-ester Lubricants, Halogenated Hydrocarbons (above 212°F).
 
Standard compounds are:
Type A and are commonly available in 75 & 90 Shore Hardness : - V75 & V90. These compounds are normally stocked in Black although other colours can be manufactured, i.e Brown / Green.Other types are available
 
Type B - Generally used in Chemical Process plant, Power Utility Seals & Gaskets
 
Type F - Used for Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam
 
Type ETP (also known as Viton Extreme) - Offer excellent Chemical resistance and greater performance compared to standard compounds. Used for Automotive & Off Road - High pH lubricants, greases, & Coolants.

Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Any questions for High Temperature Resistant Viton O Ring/Rubber O Rings, please do not hesitate to contact me. It is our pleasure to be on service of you!

Dongguan Walle Sealing Technology Development Co., Ltd
Tel: 86-769-33291139 / 22762051
Mobile/: 13620011767
Fax: 86-769-22762052
URL: www.walleseals.com/en

NM Steel Plate

Wear Resistant Steel Plate refers to special plate products designed for use in large-area wear conditions. The commonly used wear-resistant steel plate is a plate product made of a certain thickness of alloy wear-resistant layer with high hardness and excellent wear resistance on the surface of ordinary low-carbon steel or low-alloy steel with good toughness and plasticity by surfacing method. In addition, there are cast wear-resistant steel plates and alloy quenched wear-resistant steel plates.

Wear-resistant steel,wear-resistant steel plate,Wear-resistant steel plates,wear resistant steel plate,wear resistant steel plates

Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.sdrizhaoxinsteel.com