Model NO.: RH
Grinding Head Number: 9
Condition: New
Vacuum Lifter: Glass Sucker
Trademark: SUNNY
Transport Package: in Wooden Cases
Specification: ISO9001/2000
Origin: China
HS Code: 8477800000
Model NO.: RH
Grinding Head Number: 9
Condition: New
Vacuum Lifter: Glass Sucker
Trademark: SUNNY
Transport Package: in Wooden Cases
Specification: ISO9001/2000
Origin: China
HS Code: 8477800000
RX4-D was one of BPD vacuum lifters, it featured of DC 12V battery powered which make sure that the lifter could be applied for glass plate or curtain installation in most of site without cable collection. The lifter composed of main frame, tilting unit, rotation unit and vacuum system, it performed the plate in tilting between horizontal and vertical and rotation 360 degree in vertical.
 Main performance:Capacity: 350kg at 4 pads
Power: DC 12V
Tilting: Manually
Rotation: Manually
Working pressure: electrical vacuum pump compressed air 6-8pa
Vacuum control: By hand sliding valve
Main from dimensions: 910*890mm(without extension arms)
Battery Life: 30-40 hours
Self weight: about 90kgMain Feature:Increased safety via 2 of independent vacuum systems, each of them is designed with whole set of components (Vacuum pump included)
Hi-content Li-battery keeps long working time possible
According to EN13155&pr-EN13105-1&Pr-EN13105-2
Warning lamp and acoustic signal indicate the insufficient vacuum level
Hi-accuracy Digital vacuum swift was easily adjustable to regulate the pump starting/stopping time
Extendable arms available to fit bigger plate
Battery charger integrated in the main frame
Two vacuum system was controlled in one sliding valveMain components:
    Steel frame: Good quality steel material in stable welded and screwed. Vacuum Pump: two of vacuum pump Model CV-35, DC12V, 90W,Max vacuum level up to 85%4 of suction pads of Dia. 290mm with buffer spring, directly mounted on the main frameAn independent safety tank and a Non-return valve in each vacuum system to ensure a long keeping time in case power failure.A Digital vacuum switch n each vacuum system to detect the vacuum level and adjust the vacuum level by button.A special designed hand switch slide valve is used for manual controlling the "Suction-Release", A res-yellow-green colors battery indicator shows the present battery contentThe device has an integrated warning unit EW0 with acoustic signal. It runs on a battery and chargeable independent of power supply. In case of a power failure or if the vacuum drops below 60% a howler starts.A DC12V, 40Ah Li- battery build in the lifter and 5A battery charger integrated on the main frame A Manual tilting unit for tilting from 0-85 degrees A manual rotation unit for 360 degrees rotationA round hand lever mounted on the frame for any-degree use
Contact Information:
Ms Awen Yin
Mob: 0086 15063343341
 
 
 
 
  RX4-D was one of BPD vacuum lifters, it featured of DC 12V battery powered which make sure that the lifter could be applied for glass plate or curtain installation in most of site without cable collection. The lifter composed of main frame, tilting unit, rotation unit and vacuum system, it performed the plate in tilting between horizontal and vertical and rotation 360 degree in vertical.
 Main performance:Capacity: 350kg at 4 pads
Power: DC 12V
Tilting: Manually
Rotation: Manually
Working pressure: electrical vacuum pump compressed air 6-8pa
Vacuum control: By hand sliding valve
Main from dimensions: 910*890mm(without extension arms)
Battery Life: 30-40 hours
Self weight: about 90kgMain Feature:Increased safety via 2 of independent vacuum systems, each of them is designed with whole set of components (Vacuum pump included)
Hi-content Li-battery keeps long working time possible
According to EN13155&pr-EN13105-1&Pr-EN13105-2
Warning lamp and acoustic signal indicate the insufficient vacuum level
Hi-accuracy Digital vacuum swift was easily adjustable to regulate the pump starting/stopping time
Extendable arms available to fit bigger plate
Battery charger integrated in the main frame
Two vacuum system was controlled in one sliding valveMain components:
    Steel frame: Good quality steel material in stable welded and screwed. Vacuum Pump: two of vacuum pump Model CV-35, DC12V, 90W,Max vacuum level up to 85%4 of suction pads of Dia. 290mm with buffer spring, directly mounted on the main frameAn independent safety tank and a Non-return valve in each vacuum system to ensure a long keeping time in case power failure.A Digital vacuum switch n each vacuum system to detect the vacuum level and adjust the vacuum level by button.A special designed hand switch slide valve is used for manual controlling the "Suction-Release", A res-yellow-green colors battery indicator shows the present battery contentThe device has an integrated warning unit EW0 with acoustic signal. It runs on a battery and chargeable independent of power supply. In case of a power failure or if the vacuum drops below 60% a howler starts.A DC12V, 40Ah Li- battery build in the lifter and 5A battery charger integrated on the main frame A Manual tilting unit for tilting from 0-85 degrees A manual rotation unit for 360 degrees rotationA round hand lever mounted on the frame for any-degree use
Contact Information:
Ms Awen Yin
Mob: 0086 15063343341
 
 
 
 
 

Sport Tyre

Sport Tyre,Karting Atv Tire,Butyl Sport Tyre,Butyl Rubber Inner Tube

Jiangyin Estone Trading Co.,Ltd. , https://www.estonerubber.com