SUITABLE MATERIAL
Raw material: Q215, Q235A etc.
Thickness of coil: 1.5-4.5mm
Width of coil: Max 480mm
TECHNICAL SPECIFICATION &LINE COMPONENTS
(1) Hydraulic un-coiler
Capacity of loading: 5T
Motor: 2.2kw
Inner diameter of shaft: 460-520mm
Outer diameter of coil: Max 1200mm
(2)Leveling and feeding device
(3)Hydraulic punching device
Two molds punching
Punch material: Cr12
Pressure system: 0~16MPa
(4)Roll forming machine
Use independent frame (nodular cast iron) for high accuracy forming, and the stands can be changed easily
Forming step: 17-step
Diameter of shaft: 90mm
Material of roller: GCr15
Forming speed: 3-10m/min
(5)Hydraulic cutting device and run-out table
(6)PLC control cabinet
The impeller of the water pump is made of cast iron, and the blades on the impeller play a major role. The shape and size of the impeller of the water pump are closely related to the performance of the water pump. Generally, the impeller of the water pump can be divided into two types: single-suction impeller and double-suction impeller. Most of these types of double-suction impellers are double-suction impellers with both sides absorbing water and large flow. The impeller is the core component of the water pump and the main factor affecting the working efficiency. Under certain working conditions, if the impeller is not well designed, hydraulic loss and clearance loss will occur at the pump inlet and blade. So, we must choose a professional pump impeller manufacturer in terms of selection.
Water Pump Impeller,Stainless Steel Compressor,Precision Casting Water Pump Impeller,Stainless Steel Water Pump Impeller
Baizhu Network Technology Co., Ltd. , https://www.baizhucasting.com