Main features:
1) The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2) The machine is equipped with an overload protection device to prevent the main components from being damaged.
3) The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4) The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5) The base frame is a whole framework, which is convenient for installation.
6) Stock bender for direct rubber sheet and knife to cut as your need to assemble.
7) Auto-lubrication sysytem for greese or oil and match bearing bush.
8) we have CE, SGS, ISO 9001 certification.
|
Type |
Xk-160 |
Xk-250 |
Xk-300 |
Xk-400 |
Xk-450 |
Xk-560 |
Xk-660 |
|
Working diameter of rolls(mm) |
160 |
250 |
300 |
400 |
450 |
560 |
660 |
|
Working length of rolls(mm) |
320 |
620 |
750 |
1000 |
1200 |
1530 |
2130 |
|
Front roll surface speed(m/min) |
8.95 |
14.1 |
15.1 |
18.65 |
24.26 |
27.72 |
28.6 |
|
Friction ratio |
1:1.35 |
1:1.17 |
1:1.27 |
1:1.27 |
1:1.27 |
1:1.2 |
1:1.24 |
|
Max.nip(mm) |
4.5 |
8 |
8 |
10 |
15 |
15 |
15 |
|
Capacity per.batch(kg) |
1-2 |
8-15 |
15-20 |
18-35 |
25-50 |
35-50 |
165 |
|
Motor power (kw) |
5.5 |
18.5 |
22 |
37 |
55 |
90 |
245 |
|
Overall dimension(mm |
1380*860 *1320 |
3400*1500 *1800 |
3580*1550 *1695 |
4350*1850 *1785 |
5200*2380 *1840 |
5845*2284 *1978 |
7465*3662 *2080 |
Main features:
1) The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2) The machine is equipped with an overload protection device to prevent the main components from being damaged.
3) The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4) The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5) The base frame is a whole framework, which is convenient for installation.
6) Stock bender for direct rubber sheet and knife to cut as your need to assemble.
7) Auto-lubrication sysytem for greese or oil and match bearing bush.
8) we have CE, SGS, ISO 9001 certification.
|
Type |
Xk-160 |
Xk-250 |
Xk-300 |
Xk-400 |
Xk-450 |
Xk-560 |
Xk-660 |
|
Working diameter of rolls(mm) |
160 |
250 |
300 |
400 |
450 |
560 |
660 |
|
Working length of rolls(mm) |
320 |
620 |
750 |
1000 |
1200 |
1530 |
2130 |
|
Front roll surface speed(m/min) |
8.95 |
14.1 |
15.1 |
18.65 |
24.26 |
27.72 |
28.6 |
|
Friction ratio |
1:1.35 |
1:1.17 |
1:1.27 |
1:1.27 |
1:1.27 |
1:1.2 |
1:1.24 |
|
Max.nip(mm) |
4.5 |
8 |
8 |
10 |
15 |
15 |
15 |
|
Capacity per.batch(kg) |
1-2 |
8-15 |
15-20 |
18-35 |
25-50 |
35-50 |
165 |
|
Motor power (kw) |
5.5 |
18.5 |
22 |
37 |
55 |
90 |
245 |
|
Overall dimension(mm |
1380*860 *1320 |
3400*1500 *1800 |
3580*1550 *1695 |
4350*1850 *1785 |
5200*2380 *1840 |
5845*2284 *1978 |
7465*3662 *2080 |
The steering kunckle arm,also known as trapezoidal arm,is a force transmission component after the first step of the steering transmission device.The Steering Knuckle arm is installed on the left and right knuckles,and the other end is connected with a ball pin and a tie rod.The steering knuckle is the part that finally realizes the steering.when the vehicle is steering,the driver applies a steering torque to the steering wheel,the torque through the steering shaft,the transmission shaft,the steering gear,the steering gear amplification,the torque into the steering rocker arm, Then through the steering straight pull rod to the steering kunckle and the steering knuckle arm,finally passed to the wheel yi,so that the sheel deflection.It can be seen that the structural requirements of the steering knuckle arm are connected to the role of the straight tie rod and the wheel,and the steering function.
Our company sells the steering kunckles of all models made in China.convert thucks to provide quality spare parts:
Reliable fit - precision-engineered to match the design and dimensions of original components
Durable construction - manufactured to strict standards using sturdy, safe materials
Rigorously tested - thorough quality control measures ensure longevity
Car Pitman Arm,Truck Pitman Arm,Pitman Arm Assembly,Steering Pitman Arm
Jilin Province Xuan Yi Trading Co.,Ltd. , https://www.xytruckpart.com