High Accuracy Stud and Track Roll Forming Machine

A.Main technical parameter
1, Raw Material : hot-dip galvanization steel strip
2, The thickness of the raw material: 0.5-1.8mm
3, The width of the feed-in: 400mm
4, The inner diameter of the steel coil : 508-600mm
5, The outer diameter of the steel coil : 1200MM
6, Main forming machine motor:Electromagnetic speed motor 7.5kw
7, Working voltage 380v 50hz  control voltage 24v
8, Forming steps: 12steps 
9, Main forming machine use welded steel structure 
10, Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )
11, Roller shaft use 45# steel, modulation disposal, the hardness of the modulation is  HB250-280.surface grinding. The outer diameter is 60mm
12, Roller mould use Gcr15,salt bath quenching.hardness is HRC58-62
13, The fastest production speed 0-22M/ minute
14, Tolerance:  +/-0.50mm
15, Feed-in material way : from left to right 
B .cutting equipment 
16, hydraulic pressure qua power switch off
17, The ability of the cutting: 6tons
18, Hydraulic system pressure: 12Mpa. Work pressure 5Mpa
19, The form of the cutting: 45 degree skew
20, cutting scrap: no
21, The cutting machine frame use the high structural frame welding
22, The cutting mould is mould steel CR12, salt quenching hardness  is HRC60-62 
23, Cutting length tolerance <= 1.5mm 
24, Steel structure frame 
25, Max bear weight of machine is 2tons
C.The whole production line 
Feed-in machine --- material right/left guide --- correct calm machine - molding mainframe - roll mould ---finished product correct straight machine --- hydraulic prssure cutting equipment( hydraulic pressure station) ----- track cutting stepped vehicle - sever mould ---- received frame of material --- electric control box  
D.Meas of the machine:
Main electric  L 5000mm X W 1650mm X H 1250mm
Length of the production line L 14500mm×W 1650mm X H 1250mm
The volume of production L 20000mm X W 4000mm 



 

Customized Steel Fabrication

QUANTUM Workshop has been supplying steel equipment and structure manufacturing service from the year of 2011. We focus on producing the highest quality conveyor equipment and metal products with advanced steel fabrication processes and machinery. Our commitment to quality metal products, superior customer service and ability to manufacture and assemble has earned us the trust and recognition from our clients in Australia and Asian countries.

Our Fabrication capacity includes but is not limited to:

Structure Engineering Design and Shop detailing services

All Industrial Conveyors, belt conveyor, Chain Conveyor, Bucket Elevator, Screw Conveyors etc.

Heavy industry workshop building structures

Industrial process plant buildings, trusses, trestles

Mining equipment, plate works (chutes, hoppers, bins, tanks etc.)

Non-pressure vessel/tanks

Pipe spools fabrication

Steel Structures Installation

Raw Material can be carbon steel, stainless steel etc. Surface protection can be painted or hot dip galv.

As a diversified supplier, we are able to handle complex projects and can offer a one-stop shop service from detail design and shop detailing to supply and fabrication. This allows for a large reduction in indirect cost and risks. All work is done under one roof and will reduce the number of interfaces and contracts, thus saving on management cost and risks for our clients.

Customized Steel Fabrication,Steel Structure Manufacturing,Structural Steel Fabrication,Custom Metal Fabrication

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.fkconveyor.com