Model NO.: MSG/MSGH
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Ash Pumps
Seal: Gland Shaft Seal or Mechanical Seal
Trademark: SZ
Transport Package: Wooden Crates
Specification: CE, SGS
Origin: Hebei, China
HS Code: 84138100
Model NO.: MSG/MSGH
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Ash Pumps
Seal: Gland Shaft Seal or Mechanical Seal
Trademark: SZ
Transport Package: Wooden Crates
Specification: CE, SGS
Origin: Hebei, China
HS Code: 84138100
MSG / MSGH GRAVEL PUMPSProduct features:
MSG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance.
Product Features:
- Single casing
- Wide wet-passage
- Wear resistant metal wet end part, long service life
- Discharge direction can be oriented at any degrees
- Good performance of NPSH
Â
Â
Type | Capacity (l/s) |
Head (m) Â |
Spead (r/min) |
Efficiency (%) Â |
NPSHr(m) | Inlet Dia (mm) |
Outlet Dia (mm) |
Max.Dia of Flowed Partice (mm) |
MSG-4D | 10-70 | 3.5-51 | 600-1400 | 30-50 | 2.5-3.5 | 100 | 150 | 82 |
MSG-6E | 38-160 | 10-48 | 800-1400 | 50-60 | 3-4.5 | 150 | 200 | 127 |
MSG-8S | 60-272 | 13-50 | 500-1000 | 45-65 | 3-7.5 | 200 | 250 | 178 |
MSG-8F | 60-272 | 13-50 | 500-1000 | 45-65 | 3-7.5 | 200 | 250 | 178 |
MSG-10F | 100-420 | 11-58 | 400-850 | 50-70 | 2-4.5 | 250 | 300 | 220 |
MSG-10G | 100-420 | 11-58 | 400-850 | 50-70 | 2-4.5 | 250 | 300 | 220 |
MSG-12G | 140-880 | 6-66 | 300-700 | 60-68 | 2-8 | 300 | 350 | 241 |
MSGH-10G | 170-620 | 28-78 | 350-700 | 60-72 | 2-8 | 250 | 300 | 210 |
MSGH-8S | 110-360 | 18-80 | 500-950 | 60-72 | 2-5 | 200 | 250 | 180 |
Product features:
MSG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance.
Product Features:
- Single casing
- Wide wet-passage
- Wear resistant metal wet end part, long service life
- Discharge direction can be oriented at any degrees
- Good performance of NPSH
Â
Â
Type | Capacity (l/s) |
Head (m) Â |
Spead (r/min) |
Efficiency (%) Â |
NPSHr(m) | Inlet Dia (mm) |
Outlet Dia (mm) |
Max.Dia of Flowed Partice (mm) |
MSG-4D | 10-70 | 3.5-51 | 600-1400 | 30-50 | 2.5-3.5 | 100 | 150 | 82 |
MSG-6E | 38-160 | 10-48 | 800-1400 | 50-60 | 3-4.5 | 150 | 200 | 127 |
MSG-8S | 60-272 | 13-50 | 500-1000 | 45-65 | 3-7.5 | 200 | 250 | 178 |
MSG-8F | 60-272 | 13-50 | 500-1000 | 45-65 | 3-7.5 | 200 | 250 | 178 |
MSG-10F | 100-420 | 11-58 | 400-850 | 50-70 | 2-4.5 | 250 | 300 | 220 |
MSG-10G | 100-420 | 11-58 | 400-850 | 50-70 | 2-4.5 | 250 | 300 | 220 |
MSG-12G | 140-880 | 6-66 | 300-700 | 60-68 | 2-8 | 300 | 350 | 241 |
MSGH-10G | 170-620 | 28-78 | 350-700 | 60-72 | 2-8 | 250 | 300 | 210 |
MSGH-8S | 110-360 | 18-80 | 500-950 | 60-72 | 2-5 | 200 | 250 | 180 |
Elevator Guide Rail Clip,Guide Rail Fishplate,Elevator Rail Clip
Hitech Elevator Co., Ltd. , http://www.elevator-control-traction.com