Model NO.: gl006
Output Power: 4.3-10.1kw
Drilling Weight: 5kn
Max Drilling Weight: 10kn
Joint Thread: 11/2reg
Trademark: GLORYTEK
Specification: SGS
Origin: China
Usage: It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc.
Specifications: We can produce series of downhole motors in different sizes, as
A Variety of Types & the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.
1. Standard type Standard motor, mud lubricating transmission shaft, straight, single and double bent.
2. Long type The torque is increased by 30%to 60%than standard ones, mud lubricating transmission shaft, straight, single and double bent.
3. High flow rate type The adoption of hollow rotor and different sizes of hard alloy jet nozzle to increase the incoming flow and bit power.
4. High deflection type The unique structure design makes the overall length shorter and bent housing closer to the bit, deflection rate reach up to 1/m, so as to keep good working conditions.
5. High temperature resistance type The motor stator is made of superior quality high temperature resistant rubber, which enables the motor to perform stably in the well bottom at max. 17.
6. Oil-sealed transmission shaft type It improves the working condition of thrust bearing and radial bearing, and increases the life span of each single trip.
7. Bend angle adjustable type We equip the motors with adjustable bend housing in different types and sizes, and through which before dropping we can adjust the bend angle.
8. Saturated saltwater mud resistance type The special coating on the rotor with strong ability of anti-corrosion and wear-resistance enables the motor to work stably for a long time in the condition of saturated saltwater mud.
9. Impact Resistance Type We adopt a series of shock absorbers to lighten or eliminate bit jumping and impact shock occurring in drilling, protect the drilling tools avoiding damage, increase service life and ensure the drilling safe and efficient. Style impact resistance downhole motor is our new technology patent products. Patent No ZL2011 2 0000193.2)
Spec. Recommended Hole Size Input Flow Rate Pressure Loss Bit Speed  Working Torque Delay Dynamic Torque Output Power Drilling Weight Max Drilling Weight Joint Thread Length
Unit mm         In L/S Mpa r/min N.m N.m KW KN KN In In mm
5LZ57×7.0 83-121 31/4-43/4 1.5-3.5 3.2 185-430 200 350 4.3-10.1 5 10 11/2REG 11/2REG 2822
5LZ73×7.0 83-121 31/4-43/4 2-4 3.2 80-160 615 1077 5.8-11.5 12 25 23/8REG 23/8REG 3423
9LZ89×7.0 105-143 41/8-55/8 3-8 3.2 147-392 504 882 8.64-23 20 30 27/8REG 27/8REG 2911
5LZ95×7.0 114-150 41/8-57/8 5-12 3.2 140-320 710 1240 10.5-25 21 40 27/8REG 27/8REG 3920
5LZ120×7.0 152-200 6-77/8 8-16 3.2 80-180 1850 3200 23-47 64 106 31/2REG 31/2REG 5039
5LZ165×7.0V 245-244 81/8-95/8 18-30 3.2 111-167 4440 7770 57.6-86.4 80 160 41/2REG 41/2REG 7408
5LZ165.5×7.0V 215-244 81/8-95/8 18-30 4.0 120-180 5135 8987 72-108 90 180 41/2REG 41/2REG 7748
5LZ172×7.0V 215-244 81/8-95/8 18-30 4.0 120-180 5135 8987 72-108 90 180 41/2REG 41/2REG 7391
5LZ172.5×7.0V 215-244 81/8-95/8 20-35 4.0 115-180 6452 11299 86.4-151.2 100 200 41/2REG 41/2REG 8031
7LZ172.5×7.0V 215-244 81/8-95/8 20-35 4.0 75-180 6527 11420 59.5-108.6 80 160 41/2REG 41/2REG 8631
5LZ185×7.0 215-244 81/8-95/8 20-35 4.0 184 5436 8154 80-140 120 240 41/2REG 61/2REG 8120
5LZ185.5×7.0 215-244 81/8-95/8 20-35 4.0 173 5939 8908 80-140 120 240 41/2REG 61/2REG 8120
5LZ197×7.0 244-311 91/8-125/8 20-40 3.2 61-122 14118 14118 57.6-115.2 120 240 51/2REG 65/8REG 7998
5LZ197.5×7.0 244-311 95/8-121/4 20-40 4.0 85-160 12640 12640 72-144 130 260 51/2REG 65/8REG 8598
7LZ203×7.0 244-311 95/8-121/4 20-40 3.2 70-155 12289 12289 57.6-126.7 150 240 51/2REG 65/8REG 7798
5LZ203.5×7.0 244-311 95/8-121/4 20-40 4.0 70-155 8778 15362 72-158.4 170 260 51/2REG 65/8REG 8598
5LZ216×7.0 273-323 103/4-123/4 22-48 3.2 61-138 8895 15567 63.36-138.29 190 300 65/8REG 65/8REG 7756
5LZ216.5×7.0 273-323 103/4-123/4 22-48 4.0 61-138 11117 19455 79.2-172.8 238 378 65/8REG 65/8REG 8546
5LZ244×7.0 311-445 121/2-171/2 50-75 3.2 91-136 15124 26468 144-216 200 360 65/8REG 75/8REG 8635
7LZ244.5×7.0 311-445 121/2-171/2 50-75 4.0 91-136 18905 33085 180-270 250 450 65/8REG 75/8REG 9235

Liquid Silicone Rubber

high temperature resistant Liquid Silicone Rubber ,Liquid Silicone Rubber In Molding,Silicone Rubber Injection Molding,Liquid Silione Rubber Lsr

Changzhou Dahua-Luckypower , https://www.lpsiliconeemulsion.com