How much do you know about the maintenance of a constant temperature culture shaker ?
1. Our experience is that it is best to heat the water when replenishing the water to reach the temperature of the incubator.
2 , first wipe the inner wall with 75% alcohol, ventilation for 10 minutes, ultraviolet radiation can be 30 minutes.
3 , fumigation after blowing a day is definitely not enough, at least for a week before you can let the formaldehyde cleared up, or cell length is not good.
4. Some temperature-controlled culture shakers can heat the inner wall to 90 degrees, and some also have ultraviolet function. Conventionally, one should use alcohol to scrub the inner surface once a week.
5. Our usual treatment is to wipe the inner wall with 75% alcohol, then fumigate with formaldehyde potassium permanganate for one night, and then ventilate for a whole day.
6. The best thing is to keep the routine. The role of copper sulfate is to inhibit the growth of bacteria, because the incubator now has antibacterial function.
7 , the incubator out of the plate out of high pressure, the wall with 75% alcohol wipe it again, use Shile music to wipe it again, and then take a night UV, the effect is very good.
8. After autoclaving the plate, add an appropriate amount of sterilized double-distilled water or raw saline to the sterile operating table, plus a small amount of benzalkonium chloride. Concentration does not matter. Cells can be grown.
Cpe Frosted Zipper Bag,Customized Cpe Plastic Bags,Cpe Frosted Self-Adhesive Bags,Frosted Zipper Bag
Dongguan Pasike Packaging Co., Ltd. , https://www.dgpasike.com