Crane Truck crane truck stands, it is a scalable system and through the hydraulic lift system to achieve cargo lifting, lifting and rotating device is, usually with truck mounted crane truck Used for assembly. It is composed of the chassis, power take-off device, crane, and cargo compartment of the truck. Crane manufacturers have XCMG cranes, stone coal, Yutong Heavy Industry, and other manufacturers, operating methods can be about two-way operation, hand throttle can be adjusted to the speed of rotation and lifting speed. So how should the rope truck with the crane connect?
Different types of truck cranes have different types of rope card connections. The connection method also has a detailed decision with the mode and object of work. When the vehicle is in use, the net distance of the inner side of the U-shaped ring is generally larger than the diameter of the steel wire rope, and the rope groove of the rope card seat should be aligned with the direction of the steel wire rope. It is basically consistent with the surface. Then, the following instructions for use must be taken into account during the use of the vehicle.
1. The rope clamp of the truck crane should be as close to the collar as possible, and it is necessary to better confirm that the rope clamp is properly tightened. In the position of the rope head, be sure to use a thin wire to bind firmly.
2. It should be noted here that the direction of the ropes on the same rope is required to be the same, that is to say the contact between the ropes and the U-shaped parts and the contact between the main ropes and the deck. If the main rope is in contact with the U-shaped part, if the wire rope is squashed, it is relatively easy to break the wire when subjected to stress. 3. The rope card above the crane should be tightened firmly until the wire rope is flattened. Use nut and rope clamp to fasten it, so as to ensure the connection stability of the connector.
4, in order to be able to more aspects of the inspection to the joint position is not completely stable, and whether there is no sliding rope situation, you can place a safety bend in the position of the rope, if it is in the process of using the crane condom was suddenly After straightening, there is a slippage in the wire rope that has surfaced the joint. Remedial measures should be taken immediately to avoid any safety accident.
Roller conveyor line is a common continuous conveying equipment, because of its obvious advantages, so that it can not only connect the production process, but also directly involved in the production process, so in the electronic, electrical, pharmaceutical, chemical, hardware, food, beverage, textile, building materials industry and all kinds of logistics transportation, especially in various processing, assembly, packaging, storage and other pipeline has been widely used.
Roller conveyor is applicable to all types of boxes, bags, trays and other pieces of cargo transport, bulk materials, small items or irregular items need to be placed in the tray or container for conveying. Can transport single piece weight of a large material, or bear a larger impact load, easy connection between the roller line filter, can be used more than one drum line and other transport equipment or special plane to form a complex logistics system, to complete various process needs. Can be used to achieve the accumulation of material stacking conveyor. Roller conveyor is simple in structure, high in reliability, easy to use and maintenance.
Roller Conveyor,Flexible Roller Conveyor,Industrial Roller Conveyor,Roller Belt Conveyor
Shandong Sinolion Machinery Corp., Ltd. , https://www.sinolion.cc