| Technical Parameters | |||||||
| MODEL | F1(N) | Fa(N) | F4(N) | F2(N) | Fb/Fa | F3-F1(N) | OIL(ml) |
| YQ07(80) | ≥80 | 120±10 | ≤250 |  |  | 60 | 5 |
Technical Requirements:
1.Our gas spring according to the standard of Q/320412;QTH001-2004;JB/T8064.1-96; QC/T207-1996 or produce by customers' requirements.
2.Cylinder coating black acrylic acid paint, smooth coating, no grinning, no aberration.
3.Piston plate nickel phosphorus alloy, hard chromium or nitric oxide, working part is bright and clean, no knock against/scratch/peel/pinhole defect.
4.The gas spring have no block and abnormal sound during working.
Â
(YQ)Compressed Gas Spring's characteristics:
·  The main function is to support. There are only two positions for compressing and stretch respectively,   so it can not stop automatically during the running.Â
· Easy to install and use, and it is featured with low noise and energy.Â
· The full stroke is smooth.
d: piston rod diameter(mm)Â Â Â Â Â Â S: stroke(mm)Â Â Â Â Â Â Â Â D: tube diameter(mm)
L: extended length (connector center to another connector center)
Â
| Â | Gas Spring/Gas Strut/Gas Lift |
| Â Quality |
|
| |
| Use | Automobile, Train Seat, Bus, car, Furniture, Machines, Mechanical Equipment, Boat, Container, ETC |
| Material | Steel/ SS304/ carbon steel |
| Color | Black/ Customers' supply |
| Connectors | Ball connector/ Metal eye/ Clevis etc |
| Â Â Advantages |
|
| |
| |
| |
|
Production Flow:
1. Tube Cutting  2.Weld  3. Internal Parts Assemble   4. Oiling   5. Air Inflation  6. Pain      Â
7. Finished Gas Spring Assemble and Inspect        8. Packing
Advanced Machines:
"5S" Management, tidy and clean working place:
We take part in many exhibitions annually,
meeting and talking business are easy!
We Pass IATF16949, TUV and SGS Certificates:
Â
Why choose CGS?
OEM WELCOME!
MOQ?
Small order is the same service as bulk order, don't worry it.
After finished produce, we'll sent photos to you for check.
What is the leading time Â
100pcs about 4-5 days are ok. 5000pcs about 15-20 days are ok.
Customize gas spring base on quantity and accessories supply.
Our production is 10000pcs/day (8 working hours).
Â
We export from shanghai. Other ports are all ok, additional freight need be added.
Â
Â
           YQ07
| Technical Parameters | |||||||
| MODEL | F1(N) | Fa(N) | F4(N) | F2(N) | Fb/Fa | F3-F1(N) | OIL(ml) |
| YQ07(80) | ≥80 | 120±10 | ≤250 |  |  | 60 | 5 |
Technical Requirements:
1.Our gas spring according to the standard of Q/320412;QTH001-2004;JB/T8064.1-96; QC/T207-1996 or produce by customers' requirements.
2.Cylinder coating black acrylic acid paint, smooth coating, no grinning, no aberration.
3.Piston plate nickel phosphorus alloy, hard chromium or nitric oxide, working part is bright and clean, no knock against/scratch/peel/pinhole defect.
4.The gas spring have no block and abnormal sound during working.
Â
(YQ)Compressed Gas Spring's characteristics:
·  The main function is to support. There are only two positions for compressing and stretch respectively,   so it can not stop automatically during the running.Â
· Easy to install and use, and it is featured with low noise and energy.Â
· The full stroke is smooth.
d: piston rod diameter(mm)Â Â Â Â Â Â S: stroke(mm)Â Â Â Â Â Â Â Â D: tube diameter(mm)
L: extended length (connector center to another connector center)
Â
| Â | Gas Spring/Gas Strut/Gas Lift |
| Â Quality |
|
| |
| Use | Automobile, Train Seat, Bus, car, Furniture, Machines, Mechanical Equipment, Boat, Container, ETC |
| Material | Steel/ SS304/ carbon steel |
| Color | Black/ Customers' supply |
| Connectors | Ball connector/ Metal eye/ Clevis etc |
| Â Â Advantages |
|
| |
| |
| |
|
Production Flow:
1. Tube Cutting  2.Weld  3. Internal Parts Assemble   4. Oiling   5. Air Inflation  6. Pain      Â
7. Finished Gas Spring Assemble and Inspect        8. Packing
Advanced Machines:
"5S" Management, tidy and clean working place:
We take part in many exhibitions annually,
meeting and talking business are easy!
We Pass IATF16949, TUV and SGS Certificates:
Â
Why choose CGS?
OEM WELCOME!
MOQ?
Small order is the same service as bulk order, don't worry it.
After finished produce, we'll sent photos to you for check.
What is the leading time Â
100pcs about 4-5 days are ok. 5000pcs about 15-20 days are ok.
Customize gas spring base on quantity and accessories supply.
Our production is 10000pcs/day (8 working hours).
Â
We export from shanghai. Other ports are all ok, additional freight need be added.
Â
Â
Â
The platen is optimized by FEM, ensuring the platen sturdy and durable.
CrMo steel material for the tie bars, ensuring the service life of the machine,
China- Unique- Producer, Central- Locking- Toggle.
Technology of Germany hydraulic cycle design, ensuring the machine running rapidly and quietly.
Proportional back pressure control, including zero back pressure function.
Low temperature plasticizing system design, increasing the material decomposition rate.
Mold area isolation protective, increasing the product contamination rate.
High sensitive pressure speed and temperature sensors.
Self- develop high performance servo saving energy system.
Such as Medical Disposable Making Machine.
Injection Moulding Machine For Medical Equipment
Moulding Machine For Medical Equipment, Medical Use Plastic Machine, Plastic Machinery, Plastic Injection Machine For Medical,Medical Disposable Making Machine
Ningbo Shuangma Machinery Industry Co., Ltd , http://www.bolemachinery.com