Industrial automation instrumentation: focus on the development of main control system devices and intelligent instrumentation, special and special automation instruments based on fieldbus technology; comprehensively expand service areas, promote digitalization, intelligentization, and networking of instrumentation systems, and complete automation instrumentation from simulation technology In the transition to digital technology, the proportion of digital meters will reach more than 60% within 5 years; the automation of automation software with independent intellectual property rights will be accelerated.
Electrical instrumentation: focus on the development of long-lived energy meters, electronic energy meters, special special-purpose electrical measuring instruments and power grid metering automatic management systems. By 2005, the market share of middle and low-end electrical instruments and meters will reach 95%. By 2010, the domestic market share of high-end electrical instruments and meters should reach 80%.
Scientific test instruments: Key development process analysis instruments, environmental monitoring instrumentation, energy-saving analysis instruments for industrial furnaces, and automotive parts dynamic balance, power test and vehicle performance tester, geodetic measuring instrument, and electronic speed measurement Instrument, measuring global positioning system and other experimental machines, laboratory instruments and other new products. The products are mainly mid-range products with high technical content. By 2005, they accounted for 50% to 60% of the total output value.
Environmental protection instruments: focus on the development of environmental monitoring and control systems for environmental protection and water environmental protection products. In view of the strengthening of environmental protection law enforcement to accelerate the pace of environmental protection construction, increase investment in environmental protection construction, and foster the need for a new growth point in the national economy, facing the needs of the With more than 5000 environmental monitoring stations in China and a large number of urban wastewater treatment and wastewater treatment companies in this huge market, the environmental protection instrumentation industrial product market will have a substantial increase in the future. According to incomplete statistics, the output value of environmental protection instrumentation and monitoring systems in China was approximately 1.17 billion yuan in 1998, and will reach 4.2 billion yuan in 2005 to reach the international advanced level in the late 1990s, with a domestic market share of 50% to 60. %, and by 2010 it will expand to 11 billion yuan, and by 2010, the domestic market share will reach over 70%. This shows that its market prospects are very broad.
Industrial automation instrumentation: focus on the development of main control system devices and intelligent instrumentation, special and special automation instruments based on fieldbus technology; comprehensively expand service areas, promote digitalization, intelligentization, and networking of instrumentation systems, and complete automation instrumentation from simulation technology In the transition to digital technology, the proportion of digital meters will reach more than 60% within 5 years; the automation of automation software with independent intellectual property rights will be accelerated.
Electrical instrumentation: focus on the development of long-lived energy meters, electronic energy meters, special special-purpose electrical measuring instruments and power grid metering automatic management systems. By 2005, the market share of middle and low-end electrical instruments and meters will reach 95%. By 2010, the domestic market share of high-end electrical instruments and meters should reach 80%.
Scientific test instruments: Key development process analysis instruments, environmental monitoring instrumentation, energy-saving analysis instruments for industrial furnaces, and automotive parts dynamic balance, power test and vehicle performance tester, geodetic measuring instrument, and electronic speed measurement Instrument, measuring global positioning system and other experimental machines, laboratory instruments and other new products. The products are mainly mid-range products with high technical content. By 2005, they accounted for 50% to 60% of the total output value.
Environmental protection instruments: focus on the development of environmental monitoring and control systems for environmental protection and water environmental protection products. In view of the strengthening of environmental protection law enforcement to accelerate the pace of environmental protection construction, increase investment in environmental protection construction, and foster the need for a new growth point in the national economy, facing the needs of the With more than 5000 environmental monitoring stations in China and a large number of urban wastewater treatment and wastewater treatment companies in this huge market, the environmental protection instrumentation industrial product market will have a substantial increase in the future. According to incomplete statistics, the output value of environmental protection instrumentation and monitoring systems in China was approximately 1.17 billion yuan in 1998, and will reach 4.2 billion yuan in 2005 to reach the international advanced level in the late 1990s, with a domestic market share of 50% to 60. %, and by 2010 it will expand to 11 billion yuan, and by 2010, the domestic market share will reach over 70%. This shows that its market prospects are very broad.
PSYSQ-60A Dielectric Oil Dielectric Strength Tester
product description
PSYSQ-60A dielectric oil dielectric strength tester is one of the routine tests for the oily electrical properties of oil-immersed high-voltage electrical equipment. According to the provisions of TS-27- 1-78 stipulated in the “Power Factor Test Method for Electric Power Factor†revised by the Ministry of Electric Power, we Developed a dielectric strength tester for insulating oils. The dry aluminum alloy housing has a light weight, is easy to carry, is suitable for power coefficients, and is used by users in the field. This product is simpler and more efficient than similar products. The advantages of accurate measurement are ideal testers for test personnel.
Technical performance
1, the power supply voltage: 220V/50Hz
2, equipment capacity: 0.5KVA
3, the input voltage: 200V/50Hz
4, the output test voltage: 0-60KV (0-80KV users choose to buy)
5, voltmeter indication error: ± 5%
6, boost speed: 2KV / second ± 20%
7. Arcing time: no more than 20ms
Friendly reminder: Buy instruments to buy direct manufacturers, product quality and after-sales service is guaranteed.
PSYSQ-80B Automatic Insulation Dielectric Strength Tester
product description:
PSYSQ-80B fully automatic dielectric strength tester is based on the international IEC-156 and national standard GB507-86 "dielectric oil dielectric strength test method" requirements, with the majority of users feedback on the basis of YSQ-I type On the development of fully automated instruments.
This instrument chooses the one-chip computer as the leading, first set up after the method of starting the test, the whole process is controlled by the automatic operation of the computer, the operation is simple, suitable for testing the dielectric strength of various insulating oils.
Performance characteristics:
1. The instrument is equipped with an automatic detection function, such as the boot automatically enters the reset state to perform the zero return of the regulator.
2. A miniature TPU-A panel printer is used to automatically print out.
3. According to the needs of users can change the number of tests, stirring and standing time, voice-activated light control to remind continuous printing and non-printing.
4. The instrument uses automatic magnetic vibrator stirring to eliminate unevenness and bubbles in the oil sample.
Technical indicators:
1. Working power supply: AC220V±10%, 50HZ±5%
2. Measuring range: AC 0-80KV
3. Limited current: 5mA
4. Measurement accuracy: 3%
5. Regulator speed: 2KV/S±10%
6. Scheduled settings: times 1-9
Mixing time 0-1 minute 39 seconds
Resting time 0-10 minutes 39 seconds
7. Conditions of use: Ambient temperature 0°C-35°C Relative humidity ≤75%
8. Oil cup gap: 2.5mm (cup diameter gauge)
9. Volume: 415 × 315 × 315 (mm)
10. Weight: 22kg
Friendly reminder: Buy instruments to buy direct manufacturers, product quality and after-sales service is guaranteed.
PSYSQ-80C three oil cup dielectric oil dielectric strength tester
Overview:
The instrument can conveniently test the dielectric strength of insulating oil. The automatic test process is controlled by a microcomputer and meets the standards of GB507-2002 and DL429-91. After each test, each breakdown voltage value and average value of each oil cup can be printed out and the manual test can be performed.
PSYSQ-80B dielectric oil dielectric strength tester is characterized by high automation, accurate measurement, attractive appearance, safety and reliability.
First, the main technical parameters
1. Booster capacity: 1.5kVA
2. High voltage output: 0-80kV
3. Boost speed: 2.0,3.0kV/S optional
4. Breakdown current: <10mA
5. Protection circuit operating time: <1 ms
6. Boost speed error: <1%
Second, the use of conditions °C
Working voltage: 220V±10%
Operating current: <1
Power frequency: 50±1Hz
Ambient temperature: 0°C to 40°C
Humidity: <75%
PSYSQ-80D six oil cup dielectric oil dielectric strength tester
Main Specifications:
Supply voltage: AC220V±10%
Power frequency: 50Hz±1Hz
Power consumption: ≤220W
Output voltage: 0-80kV
Boost speed: 2.0, 2.5, 3.0, 3.5kV/s (adjustable)
Booster capacity: 1.5kVA
Total voltage distortion: <3%
Overall size: 580×525×376
Ambient temperature: 0°C to +40°C Relative Humidity: <75%
Electrical instrumentation: focus on the development of long-lived energy meters, electronic energy meters, special special-purpose electrical measuring instruments and power grid metering automatic management systems. By 2005, the market share of middle and low-end electrical instruments and meters will reach 95%. By 2010, the domestic market share of high-end electrical instruments and meters should reach 80%.
Scientific test instruments: Key development process analysis instruments, environmental monitoring instrumentation, energy-saving analysis instruments for industrial furnaces, and automotive parts dynamic balance, power test and vehicle performance tester, geodetic measuring instrument, and electronic speed measurement Instrument, measuring global positioning system and other experimental machines, laboratory instruments and other new products. The products are mainly mid-range products with high technical content. By 2005, they accounted for 50% to 60% of the total output value.
Environmental protection instruments: focus on the development of environmental monitoring and control systems for environmental protection and water environmental protection products. In view of the strengthening of environmental protection law enforcement to accelerate the pace of environmental protection construction, increase investment in environmental protection construction, and foster the need for a new growth point in the national economy, facing the needs of the With more than 5000 environmental monitoring stations in China and a large number of urban wastewater treatment and wastewater treatment companies in this huge market, the environmental protection instrumentation industrial product market will have a substantial increase in the future. According to incomplete statistics, the output value of environmental protection instrumentation and monitoring systems in China was approximately 1.17 billion yuan in 1998, and will reach 4.2 billion yuan in 2005 to reach the international advanced level in the late 1990s, with a domestic market share of 50% to 60. %, and by 2010 it will expand to 11 billion yuan, and by 2010, the domestic market share will reach over 70%. This shows that its market prospects are very broad.
Industrial automation instrumentation: focus on the development of main control system devices and intelligent instrumentation, special and special automation instruments based on fieldbus technology; comprehensively expand service areas, promote digitalization, intelligentization, and networking of instrumentation systems, and complete automation instrumentation from simulation technology In the transition to digital technology, the proportion of digital meters will reach more than 60% within 5 years; the automation of automation software with independent intellectual property rights will be accelerated.
Electrical instrumentation: focus on the development of long-lived energy meters, electronic energy meters, special special-purpose electrical measuring instruments and power grid metering automatic management systems. By 2005, the market share of middle and low-end electrical instruments and meters will reach 95%. By 2010, the domestic market share of high-end electrical instruments and meters should reach 80%.
Scientific test instruments: Key development process analysis instruments, environmental monitoring instrumentation, energy-saving analysis instruments for industrial furnaces, and automotive parts dynamic balance, power test and vehicle performance tester, geodetic measuring instrument, and electronic speed measurement Instrument, measuring global positioning system and other experimental machines, laboratory instruments and other new products. The products are mainly mid-range products with high technical content. By 2005, they accounted for 50% to 60% of the total output value.
Environmental protection instruments: focus on the development of environmental monitoring and control systems for environmental protection and water environmental protection products. In view of the strengthening of environmental protection law enforcement to accelerate the pace of environmental protection construction, increase investment in environmental protection construction, and foster the need for a new growth point in the national economy, facing the needs of the With more than 5000 environmental monitoring stations in China and a large number of urban wastewater treatment and wastewater treatment companies in this huge market, the environmental protection instrumentation industrial product market will have a substantial increase in the future. According to incomplete statistics, the output value of environmental protection instrumentation and monitoring systems in China was approximately 1.17 billion yuan in 1998, and will reach 4.2 billion yuan in 2005 to reach the international advanced level in the late 1990s, with a domestic market share of 50% to 60. %, and by 2010 it will expand to 11 billion yuan, and by 2010, the domestic market share will reach over 70%. This shows that its market prospects are very broad.
PSYSQ-60A Dielectric Oil Dielectric Strength Tester
product description
PSYSQ-60A dielectric oil dielectric strength tester is one of the routine tests for the oily electrical properties of oil-immersed high-voltage electrical equipment. According to the provisions of TS-27- 1-78 stipulated in the “Power Factor Test Method for Electric Power Factor†revised by the Ministry of Electric Power, we Developed a dielectric strength tester for insulating oils. The dry aluminum alloy housing has a light weight, is easy to carry, is suitable for power coefficients, and is used by users in the field. This product is simpler and more efficient than similar products. The advantages of accurate measurement are ideal testers for test personnel.
Technical performance
1, the power supply voltage: 220V/50Hz
2, equipment capacity: 0.5KVA
3, the input voltage: 200V/50Hz
4, the output test voltage: 0-60KV (0-80KV users choose to buy)
5, voltmeter indication error: ± 5%
6, boost speed: 2KV / second ± 20%
7. Arcing time: no more than 20ms
Friendly reminder: Buy instruments to buy direct manufacturers, product quality and after-sales service is guaranteed.
PSYSQ-80B Automatic Insulation Dielectric Strength Tester
product description:
PSYSQ-80B fully automatic dielectric strength tester is based on the international IEC-156 and national standard GB507-86 "dielectric oil dielectric strength test method" requirements, with the majority of users feedback on the basis of YSQ-I type On the development of fully automated instruments.
This instrument chooses the one-chip computer as the leading, first set up after the method of starting the test, the whole process is controlled by the automatic operation of the computer, the operation is simple, suitable for testing the dielectric strength of various insulating oils.
Performance characteristics:
1. The instrument is equipped with an automatic detection function, such as the boot automatically enters the reset state to perform the zero return of the regulator.
2. A miniature TPU-A panel printer is used to automatically print out.
3. According to the needs of users can change the number of tests, stirring and standing time, voice-activated light control to remind continuous printing and non-printing.
4. The instrument uses automatic magnetic vibrator stirring to eliminate unevenness and bubbles in the oil sample.
Technical indicators:
1. Working power supply: AC220V±10%, 50HZ±5%
2. Measuring range: AC 0-80KV
3. Limited current: 5mA
4. Measurement accuracy: 3%
5. Regulator speed: 2KV/S±10%
6. Scheduled settings: times 1-9
Mixing time 0-1 minute 39 seconds
Resting time 0-10 minutes 39 seconds
7. Conditions of use: Ambient temperature 0°C-35°C Relative humidity ≤75%
8. Oil cup gap: 2.5mm (cup diameter gauge)
9. Volume: 415 × 315 × 315 (mm)
10. Weight: 22kg
Friendly reminder: Buy instruments to buy direct manufacturers, product quality and after-sales service is guaranteed.
PSYSQ-80C three oil cup dielectric oil dielectric strength tester
Overview:
The instrument can conveniently test the dielectric strength of insulating oil. The automatic test process is controlled by a microcomputer and meets the standards of GB507-2002 and DL429-91. After each test, each breakdown voltage value and average value of each oil cup can be printed out and the manual test can be performed.
PSYSQ-80B dielectric oil dielectric strength tester is characterized by high automation, accurate measurement, attractive appearance, safety and reliability.
First, the main technical parameters
1. Booster capacity: 1.5kVA
2. High voltage output: 0-80kV
3. Boost speed: 2.0,3.0kV/S optional
4. Breakdown current: <10mA
5. Protection circuit operating time: <1 ms
6. Boost speed error: <1%
Second, the use of conditions °C
Working voltage: 220V±10%
Operating current: <1
Power frequency: 50±1Hz
Ambient temperature: 0°C to 40°C
Humidity: <75%
PSYSQ-80D six oil cup dielectric oil dielectric strength tester
Main Specifications:
Supply voltage: AC220V±10%
Power frequency: 50Hz±1Hz
Power consumption: ≤220W
Output voltage: 0-80kV
Boost speed: 2.0, 2.5, 3.0, 3.5kV/s (adjustable)
Booster capacity: 1.5kVA
Total voltage distortion: <3%
Overall size: 580×525×376
Ambient temperature: 0°C to +40°C Relative Humidity: <75%
Double Layer Roll Forming Machine
Metal Roll Forming,Double Layer Roll Forming Machine,Double Layer Roll Forming Making Machine,Double Layers Steel Roll Forming Machine
HEBEI SENUF MINMETALS CO. LTD , https://www.senufmachine.com