Isuzu sweeper chassis configuration: 600P country four models with 120 horsepower Isuzu engine 4KH1-TCG4O, are equipped with Isuzu MSB five-speed transmission / air conditioning / standard direction power / double row front axle 2 tons, single row front axle 2.5 tons, The rear axle is 4.8 tons / small tonnage standard 650-16 tires optional 650R16, large tonnage standard 700-16, optional 700R16 / audio: with USB interface radio / frame cross section: 172 * 65 * 4 + 3mm / Oil brake with vacuum booster pump / cab without flip / car interior, wet: wet dedusting, suction and sweep combination, JMC 77 hp auxiliary engine, centrifugal fan, four diameter 800MM vertical cyclone sweep (sweep Brushed with a water spray device), the garbage compartment and the water tank are made of stainless steel. The garbage compartment is 2.5 square meters, the water tank is 1 square, the full floating lifting nozzle, the maximum cleaning width is 3 meters, the cleaning speed is 3-15 km/hour, the cleaning efficiency is greater than 95%, and the maximum suction particle is 110MM.
ã€The main technical parameters】
Product trademark Chusheng
Announcement batch 274
Product Name CSC5070TSLW Sweeper
Product No. ZLADD4VN038
Total mass (Kg) 7300
Tank volume (m3)
Rated load mass (Kg) 1400
Dimensions (mm) 6490×1985×2600
Curing quality (Kg) 5770
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 2
Load mass utilization factor
Approach angle / departure angle (°) 24/14
Front overhang / rear overhang (mm) 1015/1660
Number of axes 2
Wheelbase (mm) 3815
Axial load (Kg) 2580/4720
Maximum speed (Km/h) 105
Others 1, the side protection is replaced by a special device, the rear protection is made of cold-formed steel / Q235, welded, the section height is 100mm, the section width is 50mm, and the lower edge is 350mm higher than the ground. 2, with the chassis optional widened front bumper. Optional single sweep. Optional square and round boxes. (This article comes from Xiagong Chusheng)
Cast Iron And Steel Parts ,Cast Iron Parts ,Iron Precision Machining,Cnc Machined For Aluminum
Ningbo CCMS Industrial Co. Ltd , https://www.ccmcmachiningparts.com