Large Pump High Flow Electric Water Transfer Submersible Blade Pump

Summarize of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Installation of water flow Channel: in terms of recommended sample installation diagram
The form of water exit: flap valve or other ways
Installation ways: Floor fixed type, suspended type, floated type and diagnal installed type;
Max. Capacity: 90000m3/h
Max. Head: 20m
Motor of Large Pump High Flow Electric Water Transfer Submersible Blade Pump

1. Submersible motor
2. Power Level: electrical performance conforms to GB756
3. Protection level: IP68
4. Voltage grade: ≤1300kw, voltage, 380v, 660v, 6000v, 10000V
5. Insulation level: F
6. Rated frequency: 50Hz/60Hz

Shaft seal of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
There are two or three stages of mechanical seal. The first stage called carborundum (directly contact with water). The second and third stage called graphite and carborundum.
Leak proof Equipment of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Sinoflo Axial/Mixed Flow Pump have been equipped with leak proof sensors. When the oil tank, the inner part of motor or the junction box has been leaked by water, the sensor will signal or made the motor shut down, and retain the malfunction signal.
Over heating protection system of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
A overheating protection device is fastened on the motor winding. When the temperature exceeds the stated value, the device will signal or made the motor shut down.
Rotation direction:
Seen from the top of the motor, the impeller is rotating clock wisely.





Application of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Sinoflo axial/mixed flow pump is widely used in industry and agriculture water lifting, urban water supply, light polluted water discharge and other water transfer project.
Working condition of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Clean water with the temperature no more than 50 or some liquids that are similar to water.





 

Hexagonal Perforated Screen Mesh is also called punched hexagonal screen mesh, it is a btter choice between square holes and round holes where plugging occurs. Hexagonal perforated plate also has a higher production of accurately sized material due to its geometric shape and greatest amount of open area.

Hexagonal perforated screen mesh material: Q235, stainless steel plate

Hole shape: Round hole, square hole, hexagonal hole.

Punching hole mesh features:

Accurate dimension
Smooth finish
Rust proof

Punch plate applications:

Engineering industries Sugar Industries

Food Processing Acoustic insulation

Building Oil refineries

Agricultural sector Rice mills

Nuclear Power Plants Furniture

Petro Chemical industries Rubber Industries

Flour mills

Hexagonal perforated screen mesh specifications:

Length: up to 3 meter
Thickness size: 1 mm to 20 mm
Width: up to 1.5meter
Hole size: 2 mm to 75 mm

Hexagonal Perforated Screen Mesh

Hexagonal Perforated Screen Mesh,Hexagonal Perforated Metal Mesh,Hexagonal Perforated Metal Screen,Hexagonal Punched Sieve Mesh

Anping Huahaiyuan Wire Mesh Co.,ltd , http://www.crusherscreenmesh.com