Before checking the engine oil, you need to wear gloves to avoid scalding; it is best to wear goggles, if necessary, you need to wear plastic protective equipment, closed shoes and so on.
Components: Engine oil
Tools: clean rags or paper towels, gloves
There are a lot of friends who do not know how to take a step. The cool car has no worries. Here's a detailed explanation for you:
The first step is to park the car on a flat road and brake it. Warm up the engine and turn off the engine when the water temperature indicator points to 60 degrees Celsius.
Part II: Wait 2-3 minutes for oil to flow to the sump. Wear gloves and prepare rags at this time.
The third step: Open the hood to find the oil dip handle, the specific location with reference to the manufacturer's instructions.
Step 4: Pull the oil dipstick out of the tube and use a clean rag to erase the oil.
Step 5: Re-insert the oil dipstick into the dipstick tube, insert it in the end, and then pull out the oil dipstick.
Step 6: Pull out the dipstick to check the position of the oil. The position of the oil should be between the minimum and maximum marks.
Step 7: If the oil mark is below the minimum mark, add oil.
What are the precautions?
Firstly, about 1 L of oil is required between the minimum mark MIN and the maximum mark MAX. When adding the oil, it is necessary to divide the oil several times. Add one time to check the oil dip once to avoid increasing the oil.
Second: Some models do not have a dipstick, the amount of oil is viewed through the computer icon, the oil warning light does not alarm, and the oil does not need to be added. If you need to add oil, you also need to add it several times, add one time to check the oil scale.
Third: After the car is in motion, do not check it immediately. After 30 minutes, check it again to ensure that it is accurate and avoid scalding.
Fourth: If you add more oil, as soon as possible to the repair station to let go of excess, so as not to cause harm.
Fifth: try to avoid the skin touch the oil, if touched with oil, to clean, oil on the skin to stimulate, but also through the capillary penetration into the skin.
Whether you are a car lover, or a car expert, it is recommended to add "Cool car worry";
Extrusion Blow Molding Machine
Extrusion Blow Molding Machine,Plastic Extrusion Molding Machine,Plastic Extrusion Blow Moulding Machine,Automatic Extrusion Blow Molding Machine
JIANGYIN HENTOL NEW MATERIAL CO.,LIMITED , https://www.hentolgroup.com