In this chapter, we will continue to explain the contents of the hazard source management system and accident hazard investigation and rectification system.
(1) Hazard source management system
In order to better implement the safety production policy of “safety first, prevention first, comprehensive managementâ€, effectively control the potential major risk factors of accidents in the workplace and production and construction, and prevent serious accidents. This system is specially formulated to ensure the safety of life and property of the people around the mine, to not affect the surrounding environmental protection, the safety and health of employees, and the smooth progress of production and construction of enterprises. Major hazards refer to high and steep slopes, step heights exceeding the requirements of the regulations, large-scale landslides, other dangers that endanger the safety of the surrounding areas, and potential locations where potential accidents may occur. Special monitoring, monitoring and management accounts should be set up for major hazards.
(II) The investigation and rectification system of hidden dangers
Safety inspection work must be regularized, institutionalized, and standardized. Through continuous inspection, it is especially important to find out and eliminate various hidden dangers in time, and eliminate accidents in the bud, in order to achieve long-term safe production, especially on-site safety inspection.
1. The safety inspection of the mine safety agency shall be carried out by the on-site inspection.
2. The production team should conduct safety inspection every day.
3. Regular security checks. Mine safety agencies should conduct regular safety inspections from time to time. Leaders, production management personnel, and engineering and technical personnel at all levels must check safety at the same time.
4. Contents of the safety inspection: Check the hidden dangers of the accident, check whether the site safety management is in place, and check whether there is a “three violations†phenomenon.
5. Regardless of the form of safety inspection, once the violation is found, it should be stopped in time, and hidden dangers should be eliminated in time and rectified within a time limit. The rectification of hidden dangers should be carried out by the principle of "three guarantees and four no pushes": the three rules are fixed personnel, fixed time, and fixed measures. The rectification is not pushed to the team, the team can be rectified and not pushed to the workshop, the workshop can be rectified and not pushed to the mining department, and the refinement of the mine department is not pushed to the superior department.
6. The mine safety agency shall establish a hidden trouble rectification account, and the workshop shall also establish a safety control point management, and the hidden dangers shall be rectified.
7. On-site safety inspection, the inspection personnel must carefully fill out the inspection form or record, and immediately identify the hidden dangers, and immediately organize the personnel to carry out rectification. If it cannot be rectified, it must immediately report to the relevant management decision-making body step by step, carry out rectification of hidden dangers, and designate personnel to Hidden source points are monitored.
Advantages of electric Pressure Cooker: first, safety is very important, because it feels unsafe and dangerous for pressure vessels, but the safety of electric pressure cooker is quite high. At present, most Electric Pressure Cookers on the market adopt the floating sealing structure of separating the inner pot from the pot cover. When the pressure is too high, such as overpressure, it can automatically relieve the pressure, which is the most critical. Moreover, in terms of control, pressure control, temperature control and other control technologies are adopted, which can automatically realize the control range of pressure and ensure safety. 2. It has the function of fast and automatic cooking. Because the electric pressure cooker can automatically realize the cooking procedure according to different food and different time, it does not need to be supervised, which reduces people's labor burden. 3. Energy saving because the electric pressure cooker is controlled by time and has pressure, its energy consumption is less and its efficiency is higher than other pots. It is a real energy-saving product. In addition, the electric pressure cooker has many selling points, such as fresh-keeping function, nutritional preservation function, boiling traditional Chinese medicine function and so on. Because the electric pressure cooker is in a sealed state with a certain pressure in the working process, the things are basically isolated from the external air, which avoids the oxidation of food with oxygen in the air during cooking and destroys the nutrition of food. It has the characteristics of short cooking time and no gas, and also avoids damaging various vitamins and amino acids in food. It has the function of fast and automatic cooking. Electric pressure cooker is an upgraded product of traditional pressure cooker and Electric Rice Cooker. It combines the advantages of pressure cooker and electric rice cooker, adopts new technologies and structures such as elastic pressure control, dynamic sealing, external rotating cover and displacement adjustable electric switch, fully sealed cooking and continuously adjustable pressure, and completely solves the safety problems of pressure cooker, Remove the safety hidden danger of ordinary pressure cooker that has plagued consumers for many years; Its thermal efficiency is more than 80%, saving time and electricity (more than 30% electricity saving than ordinary electric rice
New Arrival Pressure Cooker,Nail Salon Heater,Nail Heater Dryer
Shenzhen Ewong Technology CO.LTD , https://www.dgewongtech.com