Recently, Mitsubishi Motors Sales (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some of the 2012 imported Outlander EX (3.0L 6A/T) vehicles from June 20, 2014, for a total of 60 vehicles:
(1) The production date is from November 9, 2011 to April 10, 2013. According to the company's statistics, 59 vehicles are involved in mainland China. The recalled range of Outlander EX (3.0L 6A/T) cars has processing problems due to the right front drive shaft oil seal mounting hole of the transfer case. Under the influence of the automatic transmission oil (ATF) oil pressure, the oil seal will fall off, causing the ATF to The internal flow of the transfer case causes the vent of the transfer case to overflow the mixture of the transfer case oil and the ATF, thereby causing a shifting problem and displaying a related warning. If the driving is continued, the driving is impossible, and there is a safety hazard.
(2) The production date is from August 3, 2012 to April 10, 2013. According to the company's statistics, there is one vehicle involved in mainland China. The recall range is insufficient for the clearance between the mounting hole of the torque converter housing and the steering assist pressure tube (P/S pressure tube) for the imported Outlander EX (3.0L 6A/T) car (design factor problem) due to If the driving vibration causes interference, the plating layer of the P/S pressure tube will fall off and be corroded. In severe cases, it will cause perforation and oil leakage, which may cause the steering wheel operating force to become large, posing a safety hazard.
Mitsubishi Motors Sales (China) Co., Ltd. will notify relevant customers through the special dealers from June 20, 2014, and inspect the imported Outlander EX (3.0L 6A/T) vehicles in item (1). The problem vehicle is free to replace the transfer case to eliminate hidden dangers; for the imported Outlander EX (3.0L 6A/T) car of item (2), the steering assist pressure pipe and the steering assist return pipe are replaced free of charge to eliminate hidden dangers.
If you want to know the details of this car recall or have any questions, the relevant customers can call Mitsubishi Motors Sales (China) Co., Ltd. free service hotline / 400-821-6630, or visit the website of Mitsubishi Motors Sales (China) Co., Ltd. http: // for consultation. Users can also visit the AQSIQ website's import and export commodity inspection column (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website (), or call the AQSIQ defect. Product Management Center Hotline for more information.
Power spinning is also called thinning spinning. Power spinning is a non-cutting processing method developed on the basis of ordinary spinning. When spinning, use the tail top to fix the blank on the mold. When the mold rotates, the rotating wheel makes a feeding motion, so that the blank continuously becomes thinner point by point and abuts against the mold to form a part of the required shape. Power spinning realizes the forming of the workpiece by changing the thickness and shape of the blank.
On airplanes, various nose covers, auxiliary fuel tanks, air intakes, gas cylinders, tie rods, slide rails, and actuators are all formed by spinning. In the engine, most of the propeller cap, casing, lip, intake cone, nozzle, nozzle, etc. are also formed by spinning. Such parts have complex structures, special raw materials, and large product sizes. The use of spinning forming can improve the integrity of structural components, reduce welds and component deformation, and reduce the workload of manual calibration. More importantly, due to the increased strength of the material after spinning, the design wall thickness of the parts can be reduced, thereby reducing the weight of the whole machine and improving the reliability of the whole machine.
Heavy Duty Spinning,Cnc Metal Spinning,Metal Spinning Machine,Metal Spinning Lathe
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com