When it comes to moving, most people will be very annoyed because it means picking up baggage that will never be able to close the bag, especially if you are moving on this hot day, it will be very hot. If you are in a low-occupancy tenant, you can use a little bit of the luggage to drag it to the car. However, if you are a high-rise tenant, especially if you don’t have a lift, I’m afraid you can only move to the car little by little. Moved down. Nowadays, there is a moving ladder truck imported from abroad. No matter how many floors you live in, even if there is no elevator, you can stop worrying about moving.
As shown in the above picture, this is the moving vehicle. Behind it is a red flat panel with a red and white ladder. Above the ladder is a working platform. Furniture is riding up and down this platform. Most of the components of the ladder are imported from the original factory in South Korea. The advantages of the imported brands are stable quality, rich experience and technology. Combined with domestic use, appropriate adjustments and optimizations were made to make it more suitable for use in our country.
The maximum height of this moving ladder is 28 meters, which is basically equivalent to the height of a nine-story building. Carrying heavy objects such as sofas, beds, wardrobes, pianos, etc., it can be used without any effort. The time for carrying heavy objects from the first floor to the ninth floor is very high. It only takes less than a minute. With this moving artifact, it is no longer necessary to ask the mover to climb up to the high floors and work hard to achieve a shift from manpower to special vehicles. In order to solve the problem of high costs and inefficiency in manpower transport, some areas have installed electric devices inside the room to carry materials through the ropes.
At present, some domestic manufacturers have begun to produce ladders and win consumers' attention with low prices. However, due to lack of industry standards and companies blindly chasing profits, there are many false reports, equipment safety can not be guaranteed, and other undesirable phenomena, for the owners will cause no small trouble and risk. The owner must consult the regular manufacturer when purchasing, beware of being deceived.
Heat exchanger tubes are used for the cooling, heating or re-heating of fluids, gases, or air in a wide range of industries, such as chemical processing, hydro carbon processing and oil refining, nuclear power generation and aerospace.
These high performance tubes of Heat exchanger tubes are available at dimentions as follows:
OD: 12.7mm, 15.88mm, 19.05mm, 25.4mm, 38.1mm
WT: 1.24mm, 1.65mm, 2.11mm, 2.64mm, 3.05mm
Heat exchanger tubes can be supplied in straight lengths up to 20M, U-bent and C-formed tubes.
Max Stainless Steel (CNMAX) manufactures heat exchanger tubes to the industry specifications in the chart:
|
Specification |
Alloy |
Testing |
|
ASTM B622 |
C276 (UNS N10276) |
Seamless Eddy Current tested |
|
ASTM B626 |
C276 (UNS N10276) and |
100% Eddy Current and Hydrostatically tested |
|
ASTM A789 |
Duplex (UNS S31803) |
100% Eddy Current tested |
|
ASTM B516 |
Alloy 600 (UNS N06600) |
Class 1 - 100% Eddy Current tested |
|
ASTM A213 
 |
Stainless Steels |
Seamless - 100% Eddy Current tested |
Heat Exchanger Tube,Heat Exchanger Alloy U Tubes,Stainless Steel Heat Exchanger Tube,Heat Exchanger Shell Tube
Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com