The flow is regulated on the pressure range from 1 to 10 bar.
If no flow regulator is used, the appliance must warranty that the flow rate will never be higher than 20 litre/minute
New solenoid design, expanding applications for the valve.
Global standardization of the manufacturing process and equipment as well as the product design, ensuring there is not variation of quality or performance allowing you to source the Hydra valve wherever and whenever you need it.
Rated voltage: |
220-240V 50-60Hz, 110-120V 50-60Hz |
12VACÂ &Â VDC;Â 24VACÂ &Â VDCÂ (EU) | |
Power : |
5 - 6 watt at 230V |
Coil insulation: |
Class F (Max 140°C wire operating temperature) |
Ambient temperature: |
85°C maximum according water temperature & duty cycle |
Water temperature: |
90°C maximum according water temperature & duty cycle |
Operating duty cycle: |
Tu 25°C, Tm 90°C & Tu 60°C, Tm 25°C, continuous (100%ED) |
(220-240V) |
Tu 25°C, Tm 90°C, 3 minutes ON, 5 minutes OFF |
Operating pressure range: |
0.2 to 10 bar |
Flow regulator (optional): |
0.25 to 17 litre/minute |
Fluid |
Water |
Insulation: |
Class II to water. No grounding required |
Coil terminals: |
Two 6.35x0.8mm male tabs terminals, RAST2.5 |
Agency approvals: |
Upon request: CQC, ENEC, UL (WRAS for Hydra) |
Internal leakage |
Maximum 1 drop/minute on pressure range 0.2 to 10 bar |
External leakage |
10 bar  / 10 min |
Burst Pressure |
80Â bar |
FLOWÂ Litre/min |
Tolerance |
 |
FLOWÂ Litre/min |
Tolerance |
2,5 |
15% |
 |
0.25 |
+/-0.1 |
3 |
15% |
 |
0.35 |
+/-0.1 |
3.5 |
15% |
 |
0.50 |
+/-0.15 |
3.75 |
15% |
 |
0.65 |
+/-0.25 |
4 |
15% |
 |
0.80 |
+/-25% |
5 |
15% |
 |
1.2 |
+/-25% |
5.5 |
15% |
 |
1.3 |
+/-25% |
6 |
15% |
 |
2 |
+/-25% |
7 |
15% |
 |
2.5 |
+/-20% |
8 |
15% |
 |
3.3 |
+/-20% |
9 |
15% |
 |
3.8 |
+/-20% |
10 |
15% |
 |
5 |
+/-15% |
11 |
15% |
 |
 |
 |
12 |
15% |
 |
 |
 |
14.5 |
15% |
 |
 |
 |
15 |
15% |
 |
 |
 |
17 |
25% |
 |
 |
 |
The flow is regulated on the pressure range from 1 to 10 bar.
If no flow regulator is used, the appliance must warranty that the flow rate will never be higher than 20 litre/minute
New solenoid design, expanding applications for the valve.
Global standardization of the manufacturing process and equipment as well as the product design, ensuring there is not variation of quality or performance allowing you to source the Hydra valve wherever and whenever you need it.
Rated voltage: |
220-240V 50-60Hz, 110-120V 50-60Hz |
12VACÂ &Â VDC;Â 24VACÂ &Â VDCÂ (EU) | |
Power : |
5 - 6 watt at 230V |
Coil insulation: |
Class F (Max 140°C wire operating temperature) |
Ambient temperature: |
85°C maximum according water temperature & duty cycle |
Water temperature: |
90°C maximum according water temperature & duty cycle |
Operating duty cycle: |
Tu 25°C, Tm 90°C & Tu 60°C, Tm 25°C, continuous (100%ED) |
(220-240V) |
Tu 25°C, Tm 90°C, 3 minutes ON, 5 minutes OFF |
Operating pressure range: |
0.2 to 10 bar |
Flow regulator (optional): |
0.25 to 17 litre/minute |
Fluid |
Water |
Insulation: |
Class II to water. No grounding required |
Coil terminals: |
Two 6.35x0.8mm male tabs terminals, RAST2.5 |
Agency approvals: |
Upon request: CQC, ENEC, UL (WRAS for Hydra) |
Internal leakage |
Maximum 1 drop/minute on pressure range 0.2 to 10 bar |
External leakage |
10 bar  / 10 min |
Burst Pressure |
80Â bar |
FLOWÂ Litre/min |
Tolerance |
 |
FLOWÂ Litre/min |
Tolerance |
2,5 |
15% |
 |
0.25 |
+/-0.1 |
3 |
15% |
 |
0.35 |
+/-0.1 |
3.5 |
15% |
 |
0.50 |
+/-0.15 |
3.75 |
15% |
 |
0.65 |
+/-0.25 |
4 |
15% |
 |
0.80 |
+/-25% |
5 |
15% |
 |
1.2 |
+/-25% |
5.5 |
15% |
 |
1.3 |
+/-25% |
6 |
15% |
 |
2 |
+/-25% |
7 |
15% |
 |
2.5 |
+/-20% |
8 |
15% |
 |
3.3 |
+/-20% |
9 |
15% |
 |
3.8 |
+/-20% |
10 |
15% |
 |
5 |
+/-15% |
11 |
15% |
 |
 |
 |
12 |
15% |
 |
 |
 |
14.5 |
15% |
 |
 |
 |
15 |
15% |
 |
 |
 |
17 |
25% |
 |
 |
 |
Products For Honda,Compressor Refrigerator,Armrest Box,Interstellar Armrest Box
Foshan Shunde Shenhao Industrial Co., Ltd. , https://www.shenhaoindustrial.com