Paper Pulp Machine Vibrating Screen for Paper Mill

Vibrating screen introduction
The pulp vibrating screen is used to filter the washed pulp liquid and sieve the coarse and fine fibers in the pulp to improve the quality of the finished paper. The pulp vibrating screen uses the vertical vibrating motor as the vibration source. The upper and lower ends of the motor are equipped with eccentric weights, which convert the rotary motion of the motor into horizontal, vertical and inclined three-dimensional motion, and then transmit this motion to the screen surface. . Adjusting the phase angles of the upper and lower ends can change the trajectory of the material on the screen surface.




Characteristics of pulp vibrating screen

1. High efficiency, exquisite design and durability, any powder and mucus can be screened;

2. Easy to change the net, easy to operate, easy to clean;

3. The mesh is not blocked, the powder is not flying, and can be sieved to 500 mesh or 0.028 mm;

4. Impurities and coarse materials are automatically discharged, which can be operated continuously;

5. Unique grid design, the screen is used for a long time, and the screen is fast, only 3-5 minutes;

6. Small size, space saving and convenient movement;

7. The number of device layers can reach five layers. It is recommended to use three layers.











FAQ:


Shirley
Cell:+86 187 6142 8664
SUN HONG INDUSTRIAL CO.,LTD.

Telephone : +86 18761428664
  

  


  Vibrating screen introduction
The pulp vibrating screen is used to filter the washed pulp liquid and sieve the coarse and fine fibers in the pulp to improve the quality of the finished paper. The pulp vibrating screen uses the vertical vibrating motor as the vibration source. The upper and lower ends of the motor are equipped with eccentric weights, which convert the rotary motion of the motor into horizontal, vertical and inclined three-dimensional motion, and then transmit this motion to the screen surface. . Adjusting the phase angles of the upper and lower ends can change the trajectory of the material on the screen surface.




Characteristics of pulp vibrating screen

1. High efficiency, exquisite design and durability, any powder and mucus can be screened;

2. Easy to change the net, easy to operate, easy to clean;

3. The mesh is not blocked, the powder is not flying, and can be sieved to 500 mesh or 0.028 mm;

4. Impurities and coarse materials are automatically discharged, which can be operated continuously;

5. Unique grid design, the screen is used for a long time, and the screen is fast, only 3-5 minutes;

6. Small size, space saving and convenient movement;

7. The number of device layers can reach five layers. It is recommended to use three layers.











FAQ:


Shirley
Cell:+86 187 6142 8664
SUN HONG INDUSTRIAL CO.,LTD.

Telephone : +86 18761428664
  

  


 

China Roll Forming Machine Accessory Device,hydraulic Manual Automatic Decoiler, steel coil recoiler, output table, steel sheet Slitting Machine,Hydraulic Cutting Machine,product rack.

installation, short building period , beauty, light weight but high strength.

Roll Forming Machine Accessory Device

Roll Forming Machine Accessory Device,Machine Accessory Device,Roll Forming Machine Accessory,Hydraulic Car Coil Holder

Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl