Due to the selling price limit, domestic molds mostly use 2Cr13 and 3Cr13 for exquisite heat treatment, while foreign countries use special mold materials DINI, 2316. Their comprehensive mechanical properties, wear resistance, slump resistance and polishing brightness are significantly better than domestic materials. This fundamentally affected the appearance of the domestic mold and the use of life.
(1) Fiscal funds support the establishment of special capital for each industrial cluster in the fund for industrial skill improvement and the development funds for private and small- and medium-sized enterprises in the city to encourage the construction of industrial agglomeration bases. The main purpose of this special fund:
In recent years, the rapid development of China's mold industry, but far from the needs of the development of the national economy. Luo Baihui, head of the Die & Mould Network CEO and international mold and plastic supplier association, believes that the most important problem is the surplus of low-grade molds, and the higher molds are in short supply, and they must even rely on imports. Luo Baihui further pointed out that there are still some problems in the export of hardware molds in the Pearl River Delta region. Die exports are still passive and at a disadvantage. The international competitiveness of the molds in the Pearl River Delta is undergoing transformation and upgrading.
(II) Coordinating land development 2. Production level In the first half of 2010, the export of mold and die products was better than the previous two years. Many orders flowed constantly. These orders were urgent orders and large orders, which may be due to the eagerness of customers in Europe and America. One of the causes of foreign markets. Of course, this is inseparable from the agile development of Die City in the past two years. 2010 is the last year of the “Eleventh Five-Year Plan†of our country's mold industry. The Pearl River Delta Region Die and Mold Industry still has the problems of insufficient domestic self-provisioning rate, weak development abilities, unreasonable corporate structure, low standardization level, and low application coverage of standard parts. , management of the team and other issues. At present, the production rate of Pearl River Delta molds is as high as 60% to 70%, and the commercialization rate of molds is low. Even professional mold factories are mostly “large and complete†and “small and allâ€; while in foreign countries, 70% or more. Is a commodity mold, most companies are "small and specialized" "small and fine", production efficiency and economic efficiency. There are also some problems in the export of hardware molds in the Pearl River Delta region. The export of molds is still passive and at a disadvantage, and the international competitiveness of the Pearl River Delta molds needs to be improved. Luo Baihui believes that the Pearl River Delta mold enterprises must gain the initiative in importing and exporting, and the key is to cultivate the export ability of Chinese independent enterprises, especially private enterprises. During the "Ninth Five-Year Plan" and "Tenth Five-Year Plan" period, in order to promote the progress of the mold industry, some mold enterprises have implemented preferential tax policies, which is also an important factor to promote the rapid development of the mold industry. In order to adapt to the new situation of economic globalization and mould internationalization, mold and die enterprises should always open wider to the outside world, develop international exchanges and technical consultations, and send backbone technicians to go abroad for inspections and short-term training to rapidly improve their skills and scientific research.
Huangpu Customs statistics show that in the first half of 2009, Guangdong Province exported molds worth 360 million U.S. dollars, an increase of 20% over the same period of 2008, and exports more than double the total number of Zhejiang provinces.
Policies support the development of industrial agglomeration bases 3, mold design systems. For industrial agglomeration bases included in the recent construction plans, and its external municipal supporting facilities, the Municipal Planning and Land and Resources Bureau and other relevant departments shall give priority to planning and construction, so that the municipal facilities will be prioritized and the basic infrastructure will be established. perfect.
There are five major differences between the Chinese and foreign molds, and the town government has given certain returns to the development base of the industrial agglomeration based on their respective conditions. The construction land for supporting facilities will be paid according to the land price of the industrial land.
In the past two years, China's mold manufacturing technology has been improving.
China has been able to produce multi-position progressive dies with a precision of up to two micrometers, with a life of more than 300 million punches. The multi-position progressive dies produced by individual companies can be used on high-speed punches of 2,000 times per minute with an accuracy of up to one micron. The coastal area is particularly Guangdong Province, and the level and quality of the overall level of mold manufacturing are at the forefront of the industry in the country. The molding technology has reached the international level.
4. The level of debugging power supply shall ensure the power supply of the industrial convergence base and improve the robustness of the power supply insurance. The water supply department should guarantee the water supply for the industrial convergence base.
Encourage industrial agglomeration bases and domestic and foreign universities and training institutions to establish multi-channel and diversified talent training systems. Encourage the establishment of specialized training schools and industrial personnel training bases in industrial agglomeration bases.
(6) Other supporting policies The logistics projects that serve the leading industries within the industrial agglomeration base enjoy the supporting preferential policies for the municipal logistics park.
Driven by the continuous and rapid increase in the industrial economy, the rapid development of the mold industry in Guangdong has become the "China's largest mold province," and the molding technology has reached the international level. Luo Baihui pointed out that all urban agglomerations in the Pearl River Delta should use the sights of the “Greater Pearl River Delta†metropolitan area to fully consider their own orientation and industrial layout based on the resource endowments, geographical location, and industrial characteristics of the region, and strive to create dislocation development and complementary advantages. Take a differentiated development path.
The land for industrial agglomeration construction is included in the overall plan for land use in Shenzhen and the near-term construction plan.
(V) Introduce and train talents 2. Give the enterprises of industrial agglomeration base new projects and loan discounts for technical reform projects;
Pearl River Delta Mold International Competitiveness Promotion 1. Original data problems China's mold manufacturing companies are accustomed to burying themselves in production research while neglecting cooperation with other equipment suppliers and raw material suppliers. Virtually make users take a lot of detours. Our mold factory must work in tandem with other manufacturers and major scientific research institutes to discover the best products for users and invent more profits before they are eager to create a broad space for development.
The mold is actually tooling in terms of quality. Producing qualified products is the ultimate goal. Therefore, the quality and function of the mold depend on the test results. Due to the short delivery time and limited trial equipment, the domestic mold factory often puts the quality inspection work at the user's tryout, which is easy to cause a lot of losses and waste to the user. Moreover, due to time constraints and site constraints, it is often difficult to debug the best conditions. While some well-developed foreign companies have their own tryout sites and equipment, and may simulate the user's premise test mode, they can achieve very good results in the shortest time frame.
Certain domestic manufacturers have also adopted computer-aided design (CAD) and computer-aided manufacturing (CAM). However, they still remain in the stage of introduction, digestion and acceptance, and it is difficult to form a mature actual guidance and design system. Therefore, the development of the standard mold design software system is not to be delayed.
The municipal, district (town) finance shall provide supporting funds for the development and construction of industrial agglomeration bases, funds for the development and construction of industrial agglomeration bases (excluding land acquisition fees), and the guidelines shall be invested at a ratio of 3:7 of the municipal, district (town) finances.
Mold companies must identify their own weaknesses. There are five major differences between the Chinese mold industry and foreign counterparts.
For advanced technology and management personnel (including senior technicians) urgently needed by enterprises, the municipal, district personnel and labor departments shall apply for transfer procedures.
For personnel transferred to enterprises that do not have the right to retain personnel files, the personnel and labor files are identified by the municipal, district talent exchange centers and job placement centers.
Local enterprises move into industrial agglomeration bases, and base management agencies prioritize land use.
1. Subsidize the planning cost of the industrial agglomeration base;
The domestic mold manufacturers, process conditions are uneven, a great gap. Many manufacturers rely on manual implementation because the equipment does not support a lot of work, which greatly affects the accuracy and quality.
5. Supporting Systems (IV) Perfect Government Services 4. The construction of basic facilities of industrial agglomeration bases was included in the investment plans of the three levels of government of the city, district and town.
The relevant functional departments of the city and the district shall simplify the examination and approval procedures for the names of the industrial agglomeration bases in broken items, land, environmental protection, and construction, and provide convenient green channels. All items that can be changed from pre-approval to post-approval perform post-approval. Customs, entry and exit testing and quarantine departments shall provide enterprises with convenient services.
The Municipal Economic and Trade Bureau provides energy-saving training and technical guidance to enterprises within the industrial cluster, and formulates energy-saving plans for the enterprises free of charge.
3. Subsidy industrial agglomeration base industry public technology platform and information platform construction cost
(1) Fiscal funds support the establishment of special capital for each industrial cluster in the fund for industrial skill improvement and the development funds for private and small- and medium-sized enterprises in the city to encourage the construction of industrial agglomeration bases. The main purpose of this special fund:
In recent years, the rapid development of China's mold industry, but far from the needs of the development of the national economy. Luo Baihui, head of the Die & Mould Network CEO and international mold and plastic supplier association, believes that the most important problem is the surplus of low-grade molds, and the higher molds are in short supply, and they must even rely on imports. Luo Baihui further pointed out that there are still some problems in the export of hardware molds in the Pearl River Delta region. Die exports are still passive and at a disadvantage. The international competitiveness of the molds in the Pearl River Delta is undergoing transformation and upgrading.
(II) Coordinating land development 2. Production level In the first half of 2010, the export of mold and die products was better than the previous two years. Many orders flowed constantly. These orders were urgent orders and large orders, which may be due to the eagerness of customers in Europe and America. One of the causes of foreign markets. Of course, this is inseparable from the agile development of Die City in the past two years. 2010 is the last year of the “Eleventh Five-Year Plan†of our country's mold industry. The Pearl River Delta Region Die and Mold Industry still has the problems of insufficient domestic self-provisioning rate, weak development abilities, unreasonable corporate structure, low standardization level, and low application coverage of standard parts. , management of the team and other issues. At present, the production rate of Pearl River Delta molds is as high as 60% to 70%, and the commercialization rate of molds is low. Even professional mold factories are mostly “large and complete†and “small and allâ€; while in foreign countries, 70% or more. Is a commodity mold, most companies are "small and specialized" "small and fine", production efficiency and economic efficiency. There are also some problems in the export of hardware molds in the Pearl River Delta region. The export of molds is still passive and at a disadvantage, and the international competitiveness of the Pearl River Delta molds needs to be improved. Luo Baihui believes that the Pearl River Delta mold enterprises must gain the initiative in importing and exporting, and the key is to cultivate the export ability of Chinese independent enterprises, especially private enterprises. During the "Ninth Five-Year Plan" and "Tenth Five-Year Plan" period, in order to promote the progress of the mold industry, some mold enterprises have implemented preferential tax policies, which is also an important factor to promote the rapid development of the mold industry. In order to adapt to the new situation of economic globalization and mould internationalization, mold and die enterprises should always open wider to the outside world, develop international exchanges and technical consultations, and send backbone technicians to go abroad for inspections and short-term training to rapidly improve their skills and scientific research.
Huangpu Customs statistics show that in the first half of 2009, Guangdong Province exported molds worth 360 million U.S. dollars, an increase of 20% over the same period of 2008, and exports more than double the total number of Zhejiang provinces.
Policies support the development of industrial agglomeration bases 3, mold design systems. For industrial agglomeration bases included in the recent construction plans, and its external municipal supporting facilities, the Municipal Planning and Land and Resources Bureau and other relevant departments shall give priority to planning and construction, so that the municipal facilities will be prioritized and the basic infrastructure will be established. perfect.
There are five major differences between the Chinese and foreign molds, and the town government has given certain returns to the development base of the industrial agglomeration based on their respective conditions. The construction land for supporting facilities will be paid according to the land price of the industrial land.
In the past two years, China's mold manufacturing technology has been improving.
China has been able to produce multi-position progressive dies with a precision of up to two micrometers, with a life of more than 300 million punches. The multi-position progressive dies produced by individual companies can be used on high-speed punches of 2,000 times per minute with an accuracy of up to one micron. The coastal area is particularly Guangdong Province, and the level and quality of the overall level of mold manufacturing are at the forefront of the industry in the country. The molding technology has reached the international level.
4. The level of debugging power supply shall ensure the power supply of the industrial convergence base and improve the robustness of the power supply insurance. The water supply department should guarantee the water supply for the industrial convergence base.
Encourage industrial agglomeration bases and domestic and foreign universities and training institutions to establish multi-channel and diversified talent training systems. Encourage the establishment of specialized training schools and industrial personnel training bases in industrial agglomeration bases.
(6) Other supporting policies The logistics projects that serve the leading industries within the industrial agglomeration base enjoy the supporting preferential policies for the municipal logistics park.
Driven by the continuous and rapid increase in the industrial economy, the rapid development of the mold industry in Guangdong has become the "China's largest mold province," and the molding technology has reached the international level. Luo Baihui pointed out that all urban agglomerations in the Pearl River Delta should use the sights of the “Greater Pearl River Delta†metropolitan area to fully consider their own orientation and industrial layout based on the resource endowments, geographical location, and industrial characteristics of the region, and strive to create dislocation development and complementary advantages. Take a differentiated development path.
The land for industrial agglomeration construction is included in the overall plan for land use in Shenzhen and the near-term construction plan.
(V) Introduce and train talents 2. Give the enterprises of industrial agglomeration base new projects and loan discounts for technical reform projects;
Pearl River Delta Mold International Competitiveness Promotion 1. Original data problems China's mold manufacturing companies are accustomed to burying themselves in production research while neglecting cooperation with other equipment suppliers and raw material suppliers. Virtually make users take a lot of detours. Our mold factory must work in tandem with other manufacturers and major scientific research institutes to discover the best products for users and invent more profits before they are eager to create a broad space for development.
The mold is actually tooling in terms of quality. Producing qualified products is the ultimate goal. Therefore, the quality and function of the mold depend on the test results. Due to the short delivery time and limited trial equipment, the domestic mold factory often puts the quality inspection work at the user's tryout, which is easy to cause a lot of losses and waste to the user. Moreover, due to time constraints and site constraints, it is often difficult to debug the best conditions. While some well-developed foreign companies have their own tryout sites and equipment, and may simulate the user's premise test mode, they can achieve very good results in the shortest time frame.
Certain domestic manufacturers have also adopted computer-aided design (CAD) and computer-aided manufacturing (CAM). However, they still remain in the stage of introduction, digestion and acceptance, and it is difficult to form a mature actual guidance and design system. Therefore, the development of the standard mold design software system is not to be delayed.
The municipal, district (town) finance shall provide supporting funds for the development and construction of industrial agglomeration bases, funds for the development and construction of industrial agglomeration bases (excluding land acquisition fees), and the guidelines shall be invested at a ratio of 3:7 of the municipal, district (town) finances.
Mold companies must identify their own weaknesses. There are five major differences between the Chinese mold industry and foreign counterparts.
For advanced technology and management personnel (including senior technicians) urgently needed by enterprises, the municipal, district personnel and labor departments shall apply for transfer procedures.
For personnel transferred to enterprises that do not have the right to retain personnel files, the personnel and labor files are identified by the municipal, district talent exchange centers and job placement centers.
Local enterprises move into industrial agglomeration bases, and base management agencies prioritize land use.
1. Subsidize the planning cost of the industrial agglomeration base;
The domestic mold manufacturers, process conditions are uneven, a great gap. Many manufacturers rely on manual implementation because the equipment does not support a lot of work, which greatly affects the accuracy and quality.
5. Supporting Systems (IV) Perfect Government Services 4. The construction of basic facilities of industrial agglomeration bases was included in the investment plans of the three levels of government of the city, district and town.
The relevant functional departments of the city and the district shall simplify the examination and approval procedures for the names of the industrial agglomeration bases in broken items, land, environmental protection, and construction, and provide convenient green channels. All items that can be changed from pre-approval to post-approval perform post-approval. Customs, entry and exit testing and quarantine departments shall provide enterprises with convenient services.
The Municipal Economic and Trade Bureau provides energy-saving training and technical guidance to enterprises within the industrial cluster, and formulates energy-saving plans for the enterprises free of charge.
3. Subsidy industrial agglomeration base industry public technology platform and information platform construction cost
Aquarium specific adhesive, Aquarium adhesive , Aquarium silicone sealant
Shandong Gufeng Technology Co., LTD , https://www.gfkjgs.com