HPM high -pressure foaming principle
  Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
 Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
It is is designed for refrigerator door PUR foaming production. The line is installed as oval collocation on level ground.
ROL-32-100/80 the Refrigerator Door PU Foaming Line
32Stations Oval Continuous Foaming Line is designed for refrigerator doorPUR foaming production. The line is installed as oval collocation onlevel ground.
Motor-reducer-chain drive system is used; The rotational speed of foaming line is regulated by the frequency converter. The foaming line has the structure compact, the operation simple, the transmission smoothly, the production efficiency higher characteristic, widely applies in the refrigerator door, electric water heater thermal barrier PU foaming.
Air heating system with heat exchanger
Equipped with Fresh air generating unit and ventilation system, ensure the safety running of production.
Main Technical Parameters:
Type: ROL-32-100/80,
Mold installation board area (mm): 1000 × 800
Production tact: 15~ 30 sec.,
Time of per circle for mold conveying on the line: 8~16 min.,
Running mode: Continuous running or intermission running,
Main motor power: 4kw,
Heating oven temperature: ~ 55 degree Centigrade,
Heating way: The steam heating, the steam source provides by the customer;
Power supply required: Three phase 380V/50Hz plusmn10% or as customer's local condition
Control voltage: AC 220V/DC24V,
Total power: ~ 27, 000mm ( length )* 7, 000mm ( width)
High Temperature Resistance Graphite Heater For Furnuce
Graphite thermal field includes graphite heater, Graphite Crucible, graphite guide tube, Graphite Electrode and other graphite components. Graphite thermal field is an important part of single crystal and polycrystalline furnace.such as, carbon graphite heater,thermal field graphite heater.
High Purity Graphite Heater is an electric furnace heating element made of graphite material.Graphite material has excellent electrical and thermal conductivity, and Graphite Carbon Heater is commonly used as a heating element in special industrial furnaces.
Graphite Heater,Graphite Heaters,Graphite Heating Elements,Isostatic Graphite Heating Element
Huixian City Mishan Graphite Jip Co., Ltd. , https://www.msgraphitemold.com