Model NO.: SFDP1-033-035-41
Condition: New
Application Field: Agriculture
Valve: Viton
AMPS: 8.0A Max
Product: Agriculture Sprayer Parts
Duty Cycle: Intermittent
Diaphragm: Santoprene
Pressure: 35psi/2.4bar
Port Dimension: Quick Attach
Motor Type: 12V DC Permanent Magnet, Totally Enclosed, Non-Ven
Protection: Thermal/Ignition Protection
Brand: Seaflo
Trademark: SEAFLO
Transport Package: 1PC/Inner Color Box; 10PCS/CTN
Specification: CE ROHS ISO 9001: 2008 GMS SGS
Origin: Fujian, China
HS Code: 8413509090
SEAFLO 12v High Flow Water Pump as Agriculture Sprayer PartsApplication:
Agriculture/Yacht / RV/Caravan pressurized water system
Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
Food beverage filling & liquid transfer
Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber
Has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
  Housings: |  Polypropylene |
  Valves: |  Viton/EPDM |
  Diaphragm: |  Santoprene |
  Fasteners: |  Stainless Steel |
  Motor Shell: |  Coated Steel |
Â
Motor Voltage | 12/24V DC |
Type | 4 chamber diaphragm pump, self priming, capable of being run dry |
Mode | Demand |
Certifications Option | CE Approval |
Liquid Temperature | 140°F (60°C) Max. |
Priming Capabilities | 6 Feet (1.8 m) |
Max Pressure | 40psi (2.8bar) |
Max Flow rate | 17lpm (4.5gpm) |
Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb |
1/2 NPT thread filter for your choice. | |
Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
Motor options | 2 pin connector |
On/off switch |
Â
STANDARD PUMP CONFIGURATIONS | |||||||||
Model | Switch | GPM/LPM | PSI/BAR | Max Draw(A) | Valves | Diaphragm | Ports | Voltage | Wire Connections |
SFDP1-033-035-41 | Demand | 3.3/12.5 | 35/2.4 | 8 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
SFDP2-033-035-41 | Demand | 3.3/12.5 | 35/2.4 | 4 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
SFDP1-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 15 | Viton | Santoprene | Quick Attach | 12V | 2-Pin/Leads |
SFDP2-045-040-41 | Demand | 4.5/17.0 | 40/2.8 | 6 | Viton | Santoprene | Quick Attach | 24V | 2-Pin/Leads |
Consult factory for other available models |
Rubber oring Co., Ltd. , http://www.cnrubberoring.com