From September 1st, Wuxi Electric Bicycle Management has launched a new "Jiangsu Province Electric Bicycle Product Registration Form", which means that after the electric vehicle brand needs to be weighed, the length of the vehicle is required. Yesterday learned that the State Administration of Quality Supervision, Inspection and Quarantine announced a total of 24 unqualified electric vehicle brands, among which the Suxiang electric vehicle produced by Wuxi Feishun Electric Vehicle Factory was on the list.
It is understood that the Suxiang brand electric car that was exposed was because of unqualified indicators such as the maximum speed. Wuxi City Product Quality Supervision and Inspection Institute officials said that Wuxi conducts random inspections of electric vehicles in the city every year, and the sampling inspection standards are much higher than the specifications of the record table. Therefore, it is very difficult for manufacturers to make short positions. The reporter learned from the sales market that some of the large-scale stores have recently replaced the new standard electric vehicles.
According to the new filing table, starting from September 1, all the technical requirements for electric bicycles sold in Wuxi, in addition to the “General Technical Conditions for Electric Bicycles†(GB17761), must be in accordance with the overall dimensions and vehicle weight of the vehicle. Should also comply with the relevant provisions, namely, the front and rear wheel center distance ≤ 1350mm; front and rear trim piece width ≤ 500mm; the central axis length ≤ 400mm; front and rear tire width ≤ 76.2mm; vehicle weight (without battery) ≤ 55kg.
According to the personnel of the Wuxi Municipal Product Quality Supervision and Inspection Institute, the new "Regulations on the Filing Management Technical Parameters" existed as early as the end of last year, and the inspection standards currently implemented by Wuxi's quality inspection departments are much stricter than those specified in this parameter. “Electric vehicles produced by Wuxi electric vehicle manufacturers must first undergo self-inspection. Each year, the quality inspection department will conduct random inspections on the products of some manufacturers during a certain period of time. All electric vehicle manufacturers in Wuxi will be spot checked in a year.†It is stated that the pass rate of Wuxi's spot checks is still relatively high during this period of time, indicating that the manufacturers have made adjustments to the product standards in advance and that if they find that the products are not qualified, the manufacturers will be punished accordingly.
“The old batch of electric vehicles that do not comply with the new standard are still in production and will not be replaced.†In a Wuxi real estate electric car store on Nanchang Street, the clerk told reporters that most of the electric cars in the factory are sold. In foreign countries and abroad, the implementation of the new standard has no effect on them. “The electric cars in the store were all replaced as early as May.†The clerk pointed to a new electric car on the wall and said that the electric cars in the store are now meeting the new standards. Similarly, another electric vehicle shop in the street sells multiple brands of electric cars. The owner said that as early as July, the store had handled a batch of electric cars that did not meet the new standard in advance. “Some customers think that electric cars are now
We are getting lighter and smaller. After we show them the documents, they can accept even if the prices do not fall. After the implementation of the new standard, the board is not slow, and it takes more than ten minutes. "The owner said that the stores in the downtown area are all sold and on-line services. Once the license plate can not be directly affected the store's business, while the suburbs of some small electric car shop away from the licensing point, customers should pay more attention to the future purchase If you buy a vehicle that has been imported into the city, you may not be able to get a license.
It is understood that the Suxiang brand electric car that was exposed was because of unqualified indicators such as the maximum speed. Wuxi City Product Quality Supervision and Inspection Institute officials said that Wuxi conducts random inspections of electric vehicles in the city every year, and the sampling inspection standards are much higher than the specifications of the record table. Therefore, it is very difficult for manufacturers to make short positions. The reporter learned from the sales market that some of the large-scale stores have recently replaced the new standard electric vehicles.
According to the new filing table, starting from September 1, all the technical requirements for electric bicycles sold in Wuxi, in addition to the “General Technical Conditions for Electric Bicycles†(GB17761), must be in accordance with the overall dimensions and vehicle weight of the vehicle. Should also comply with the relevant provisions, namely, the front and rear wheel center distance ≤ 1350mm; front and rear trim piece width ≤ 500mm; the central axis length ≤ 400mm; front and rear tire width ≤ 76.2mm; vehicle weight (without battery) ≤ 55kg.
According to the personnel of the Wuxi Municipal Product Quality Supervision and Inspection Institute, the new "Regulations on the Filing Management Technical Parameters" existed as early as the end of last year, and the inspection standards currently implemented by Wuxi's quality inspection departments are much stricter than those specified in this parameter. “Electric vehicles produced by Wuxi electric vehicle manufacturers must first undergo self-inspection. Each year, the quality inspection department will conduct random inspections on the products of some manufacturers during a certain period of time. All electric vehicle manufacturers in Wuxi will be spot checked in a year.†It is stated that the pass rate of Wuxi's spot checks is still relatively high during this period of time, indicating that the manufacturers have made adjustments to the product standards in advance and that if they find that the products are not qualified, the manufacturers will be punished accordingly.
“The old batch of electric vehicles that do not comply with the new standard are still in production and will not be replaced.†In a Wuxi real estate electric car store on Nanchang Street, the clerk told reporters that most of the electric cars in the factory are sold. In foreign countries and abroad, the implementation of the new standard has no effect on them. “The electric cars in the store were all replaced as early as May.†The clerk pointed to a new electric car on the wall and said that the electric cars in the store are now meeting the new standards. Similarly, another electric vehicle shop in the street sells multiple brands of electric cars. The owner said that as early as July, the store had handled a batch of electric cars that did not meet the new standard in advance. “Some customers think that electric cars are now
We are getting lighter and smaller. After we show them the documents, they can accept even if the prices do not fall. After the implementation of the new standard, the board is not slow, and it takes more than ten minutes. "The owner said that the stores in the downtown area are all sold and on-line services. Once the license plate can not be directly affected the store's business, while the suburbs of some small electric car shop away from the licensing point, customers should pay more attention to the future purchase If you buy a vehicle that has been imported into the city, you may not be able to get a license.
Automobile Brass Tube,Copper Alloy Brass Tubes,Alloy Automobile Brass Pipe,Alloy Brass Tubes
TAICANG CITY JINXN COPPER TUBE CO.,LTD , https://www.jinxincopperpipes.com