Single Phase Ba3 0.55kw Vortex Water Pump

APPLICATION
1. The pump have a compact size and simple to use.
2. Heavy duty continuous work.
3. Ambient temperature up to 40ºC.
4. The thermal protector is installed if required.
5. The shaft is 45# steel or stainless steel and not easy to rust.
6. 220-240V 50HZ power which is safer for your using.
7. The stator is 100% copper wire with high quality.
 
OPERATING CONDITION
1. Liquid temperature up to 60
2. Ambient temper up to 40
3. Total suction lift to 9m
4. Continuous duty
 
CONSTRUCT
Pump
Pump body: Cast Iron
Impeller: Brass    
Mechanical seal: Carbon/ceramic/Stainless Steel  
Motor
Single Phase
Heavy Duty Continuous Work
Motor Housing: Aluminum 
Shaft: Carbon Steel/ Stainless steel   
Insulation class: B and F    
Protection class: IP44 or IP54  
Cooling:Externally ventilation

TECHNICAL DATA(220-240V/50HZ)

OUR GOAL
We always take the duty of "Pursue Happy Enterprise and Create the First Brand in Chinese Pump Industry", constantly improve technological development and innovation capacity, continuously create excellent products and services.
We welcome worldwide merchants to join us for common development! 

COMPANY



CONTACT US


 
APPLICATION
1. The pump have a compact size and simple to use.
2. Heavy duty continuous work.
3. Ambient temperature up to 40ºC.
4. The thermal protector is installed if required.
5. The shaft is 45# steel or stainless steel and not easy to rust.
6. 220-240V 50HZ power which is safer for your using.
7. The stator is 100% copper wire with high quality.
 
OPERATING CONDITION
1. Liquid temperature up to 60
2. Ambient temper up to 40
3. Total suction lift to 9m
4. Continuous duty
 
CONSTRUCT
Pump
Pump body: Cast Iron
Impeller: Brass    
Mechanical seal: Carbon/ceramic/Stainless Steel  
Motor
Single Phase
Heavy Duty Continuous Work
Motor Housing: Aluminum 
Shaft: Carbon Steel/ Stainless steel   
Insulation class: B and F    
Protection class: IP44 or IP54  
Cooling:Externally ventilation

TECHNICAL DATA(220-240V/50HZ)

OUR GOAL
We always take the duty of "Pursue Happy Enterprise and Create the First Brand in Chinese Pump Industry", constantly improve technological development and innovation capacity, continuously create excellent products and services.
We welcome worldwide merchants to join us for common development! 

COMPANY



CONTACT US


 

Characteristic of zinc die casting products:

1. High specific density, more strength than plastic injection molding.

2. Good casting performance, Producing complex shape and Thin-walled precision die casting parts,
the surface of Zinc Die Casting part is smooth.

3. Easy do the surface treatment: Plating, powder coating, Painting.

4. Do not attract iron when Melt and die casting, do not corrosion Zinc Die Casting Mould and Non-stick mold.

5. Have good room temperature mechanical properties and wear resistance.

6. Low melting point, Melts at 385℃, more easily forming than aluminum alloy die-casting molding.

M Domestic commonly used die-casting zinc alloy material performance:

The traditional die-casting zinc alloy: No.2, No.3, No.5, No.7. ZA8 Currently the most widely used is zinc alloy No.3.

The application of commonly used zinc alloy:

No.2: It is used to those mechanical fittings that have special need in mechanical capability, and need high rigidity and normal dimension and precision.

No.3: Good liquidity and mechanical properties, and the best combination of mechanical properties, casting properties and economical. It applied to the die casting part which the mechanical strength requirement is not high. Such as toys, light parts, decorations and part of the electric parts.

No.5: Good fluidity and good mechanical properties, high wear resistance. It applied to the zinc die casting part which has requirements of mechanical strength. Such as auto parts, mechanical and electrical parts, machinery parts, electrical components.

Domestic main zamak chemical composition %

Die-casting zinc alloy mechanical properties

The precision of the Zinc Alloy Die Casting: ±0.05mm;

Smoothness of surface of rough part: Ra1.6~Ra3.2;

Shrinkage rate of zinc die casting products: 0.3%;

Material wastage rate: 5%;

General zinc die-casting machining allowance: 0.3mm~0.5mm;

Surface preparation methods: Sand blasted, Shot blasting, Powder coating, Painting, Plating, Electrophoresis, Polishing

The zinc alloy die casting production and QC control

Zinc Die Casting Parts

Zinc Die Casting Parts, Zinc Die Cast, Zinc Alloy Die Casting, Zinc Die Castings, Zamak Die Casting Part, Zamak Injection Part

NINGBO BEILUN LEMA MACHINERY TECHNOLOGY CO.,LTD , http://www.china-lema.com