A lot of drivers of dump trucks have encountered this kind of situation. If they have passed the car well, they have no strength. They not only run out of oil, but also waste a lot of time. What are the reasons for the deterioration of the power of dump trucks? Listen to Xiao Bian below for analysis.
1. Insufficient oxygen supply in the cylinder
The failure of the intake system of the dump truck is one of the causes of the power deterioration. We can follow this line of inquiry to find out where the engine failure caused the engine to supply enough air, resulting in insufficient in-cylinder combustion and sudden deterioration of the power of the dump truck. .
First, check whether the trachea is cracked or loose at the interface. If the air intake tube leaks, the oxygen content in the cylinder of the diesel engine will be insufficient, and the combustion will be insufficient and the power will be reduced. Check the location of the leak, if it is loose at the interface, you can operate on the interface to tighten it, if there is a crack, the hole is relatively small, you can find some tools to repair, and then find a professional repair factory replacement.
The air filter is the lung of the engine. After a long period of use, dust and magazines are wrapped around the filter element, the filtering capacity will be reduced, and the flow of air will be hindered. As a result, the engine does not work properly and the power is deteriorated. Many turbochargers are now installed on many vehicles to increase the intake air and make the combustion more efficient, thereby increasing the power of the engine. If there is a problem with the supercharger, the supply of air to the engine is reduced and the power is reduced.
2 diesel filter plugged, injector wear
The diesel filter is also one of the most important parts. The function is to remove the impurities in the diesel and prevent the clogging of the common rail system and the nozzle. The diesel filter can effectively reduce the wear and ensure the stable operation of the engine. In some areas of China, the quality of diesel oil is relatively poor, and dump trucks use these low-quality diesel oils for a long time. If the water or impurities in the diesel oil are not filtered, the nozzles will be damaged. Damage to the fuel injector can cause engine acceleration and instability, acceleration and power failure, or black smoke emission, affecting the normal operation of the vehicle.
Aluminum machining is the use of CNC machining out, including: drilling, boring, cutting, turning, screw. Product material are: aluminum6061,6061-T6,6063,6083,7075.5052,2017 .In the high-speed machining out of the workpiece has a good finish. Aluminum machining product surface treatment has anode, electroplating, sand blasting, laser engraving LOGO, mechanical drawing, rolling flower, according to the requirements of the drawings on the product anode all kinds of colors such as color, black, red, blue, yellow. We have a special inspection department to carry out inspection, to ensure that each size of products meet the requirements of the drawings, machining aluminum(cnc aluminum) is the most common in mechanical processing, low density, not easy deformation, high precision products. So it is widely used in various industries.
Machining Aluminum,Fluorocarbon Machining Aluminium,Alumiunum Machining,Milling Aluminum
Hong Kong RYH CO., LTD , https://www.bldcncmachining.com