As the old saying goes, it's easy to go down the mountain. But for the trailer driver, it is: climbing uphill is even more difficult. The following small series introduces the driving skills of the whole car uphill and grading.
How to correct the uphill? The first thing to learn is not to use clutch clutches. Seeing this, many people may say that without using the clutch, will it cause damage to the vehicle? Actually, if you can skillfully not use clutch gears, there is no harm in the car. First, reducing clutch wear! Second, it saved fuel consumption. We all know that when we go uphill, we need to have the maximum power to control the vehicle. When we step down and switch off the gear, the power of the engine will drop by 50%! What followed was a weak slope. The chain reaction was a series of downshifts and the fuel consumption increased naturally.
How to do it can be perfect uphill? First, flush slopes with as good a line of sight as possible. Second, keep the engine powered. You can watch the speedometer downshift, not lower than 1600 downshifts. This must be remembered, that is, we often say that we must use advance amounts to allow the engine to maintain a certain degree of motivation, so that it will not stall, not boring cars, and if it does not step on clutching, it will feel uphill. In fact, it is a beautiful enjoyment.
How to do grading? First, try a few feet of brakes before grading to make sure the brakes are good, and keep your mind calm when grading. The so-called fast release is the high-speed gear opening and closing of gas, the speed control in the 80-90, if exceeded, continue to step on the brakes, reduce the speed to 30-40, and then let go of the brake, put. Slope grading operation points: Do not stick the brakes, do not step on the brakes, we all know that the brake time is too long, it will have a thermal effect, then we have no brake available. If your car has a shower, the above experience can be ignored.
After reading the above, isn't it hard to think that the whole trailer is uphill on the slope? The old driver studied, and novice drivers learned more after studying. I believe we can all become excellent trailer drivers.
Stainless Steel Twill Dutch Weave Mesh
Stainless Steel Twill Dutch Weave Mesh, this kind of woven steel mesh is weaved by a special weave technology, which integrate the Dutch weave and twill weave. The thicker warp wire and the thinner weft staggered. Each warp wire shuttles up and down with the weft wire.
Features: Stainless steel wire mesh screen has the advantages of smooth surface, high hardness, constant mesh, no deformation, high temperature resistance, corrosion resistance, flexible network, excellent filtration performance, good filtration accuracy, high load intensity, high temperature resistance, low temperature resistance and so on
Material: SS304, SS 316,SS316L
Use: Stainless Mesh is mainly used for gas, liquid filtration and other medium separation; widely used in precision pressure filter, fuel filter, vacuum filter, filter material, do aerospace, oil refining, pharmaceutical, sugar, oil, chemical industry, chemical fiber, rubber, tire manufacturing, metallurgy, food, health industry and scientific research.
Specification: The standard roll width: 1m-2m. Standard roll length: 30-50m.The steel mesh in special width and length can be produced according to customers` requirements.
Structural drawing:
The warp wire (D1) : all longitudinal braided lines.
The weft wire (D2) : all horizontal weaving lines.
Aperture : the distance between two meridians or two weft.
Mesh number: number of mesh holes per inch.
Thickness (T) : thickness of the wire mesh.
Speciation List:
Twill
Dutch Woven Stainless Steel Mesh
SPEC
NUMBER OF
HOLES PER INCH
WIRE DIAMETER
APERTURE(micron)
80II
20mesh x 250mesh
0.28x0.2
38
120II
30mesh x 300mesh
0.25x0.18
36
200II
50mesh x 500mesh
0.14x0.11
34
320I
80mesh x 700mesh
0.11x0.08
32
320II
80mesh x 780mesh
0.10x0.07
30
360
90mesh x 780mesh
0.10x0.07
25
400I
100mesh x 780mesh
0.10x0.07
22
400II
100mesh x 900mesh
0.10x0.063
20
500
120mesh x 1100mesh
0.07x0.05
17
630
150mesh x 1400mesh
0.063x0.04
16
650
180mesh x 1800mesh
0.07x0.04
14
685
165mesh x 1400mesh
0.063x0.032
13
795I
200mesh x 1400mesh
0.07x0.04
12
795II
200mesh x 1800mesh
0.05x0.032
10
850
2l0mesh x 1900mesh
0.045x0.03
10
1000
250mesh x 2000mesh
0.045x0.028
8
1125
280mesh x 2200mesh
0.036x0.026
7
1225
300mesh x 2200mesh
0.036x0.026
6
1280
325mesh x 2300mesh
0.035x0.025
5
1600
400mesh x 2800mesh
0.03x0.018
3
Stainless Steel Twill Dutch Weave Mesh,Extra Fine Stainless Steel Mesh,Stainless Steel Screen Mesh,Twill Dutch Weave Mesh
Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com