China Factory Direct European Universal Air Hose Claw Coupling/  Hose end/ Air Hose Coupling/ Hose Coupling

All Claw Coupling are investment cast steel for better dimensional precision, with machined threads and recessed gasket seat area
Claw Coupling is Not to be used for steam service
For safety purposes, use of lanyard and safety clip (supplied with hose ends) is recommended with all Claw Coupling.

Production Range:    
We have years of experience in Camlock Coupling , Air Hose Coupling, Bauer Coupling, 
Guillemin Coupling,Storz Coupling, Ground Joint Swivel Nut Coupling, Clamps, Ferrules, Spanner Wrenches, 
Hydraulic&Pneumatic Coupling,hoses and so on.
Universal air hose couplings are recommended to be used in the transfer of air and or water. 
The application should be in an open system where the air or water is in motion (dynamic)
and not in a closed pressurized (static) condition. This dynamic application involves continuous flow, therefore, 
back pressure would be relieved by the very nature of the application. The applicable system should contain pressure
relief valves to relieve any excess pressure. Safety clips and safety cables should be installed on either 
side of the coupling connection.

Air Hose Coupling

Air Hose Coupling,Air Hose Fitting,Air Hose Connector

Hebei Orient Rubber & Plastic Co., Ltd. , https://www.hiteckhose.com