Model NO.: Mooring winch
HS Code: 8425319000
The hydraulic winch
The hydraulic winch is a kind of large deck machinery used in the ship. It is used to pull up or throw ropes. It is usually mounted on the main deck of the stem or stern of the ship for mooring ropes.
The hydraulic winch mainly consists of base, support, drums, brakes, loose drums, gearboxes, electronic control systems, hydraulic power pack, etc. Its type is decided by the size of the ship and mooring force.
The mooring winch can run effectively when the ship is berthing in the sea or by the bank. It has many functions such as to drift, support and locate in the process of loading and unloading. Its constant tension adjust deviation generated by compensation vibration. The fact that the mooring winch fixed on the bank is used when the anchoring ships are loading and unloading is a excellent application example of constant tension adjustment. The hydraulic winch is usually the one with great rated load. The winch with above 10t to 5000t load is designed to hydraulic form.
It mainly consists of the hydraulic motor(low-speed or high-speed motor),hydraulic normally closed multiple plate brake, epicyclic gearboxes, clutches(optional),drums, support shaft, rack,  roll-fixed device(optional),etc. The hydraulic motor has great mechanical efficiency and starting torque. It can be fitted with the different distributors by the requirements of  working condition.  Its valve boxes can be customized and integrated into the oil distributor of the motor, such as balance valve, overload valve, high pressure shuttle valve, speed governing reversing valve, or valve boxes with other performances. The brakes and epicyclic gearboxes, etc are mounted directly in the drums. The drums, support shaft and the rack are designed by dynamics requirements, and its massive structure is concise and rational and has enough strength and rigidity, so the winches of series are characterized  by, structurally speaking, compactness, small in size, light in weight, nice appearance, and in terms of the performance, it is featured by good safety, high efficiency, great starting torque, good stability at low speed, small noise and reliable operation, etc.
(kN)rated pull (m/min) rated speed (Φmm)capacity of drum (kW)motor power
electric hydraulic
5 ≥12 Φ8×100 3/1.2  
10 ≥12 Φ10×150 4.3/1.7 5.5
20 ≥12 Φ15×150 8.5/3.5 11
30 ≥12 Φ17×150 11/11/7.5 15
40 ≥15 Φ8×100 16/16/11 22
50 ≥15 Φ20.5×180 22/22/16 30
75 ≥15 Φ26×200 30/30/22 45
80 ≥15 Φ26×200 30/30/22 37
100 ≥15 Φ30×200 45/45/30 45
150 ≥15 Φ30×200 45/45/30 55
160 ≥15 Φ32×250 60/60/45 75
200 ≥9.6 Φ40×250 45/45/30 75
250 ≥9.6 Φ44×250 60/60/45 90
315 ≥7.8 Φ52×250 60/60/45 90
400 ≥7.8 Φ56×250 85/85/64 110
450 ≥6 Φ56×250 85/85/64 110
500 ≥7.8 Φ58×250 85/85/64 110
560 ≥6 Φ64×250 85/85/64 132
600 ≥6 Φ64×250 85/85/64 132
650 ≥6 Φ70×250 85/85/64 132
1000 ≥4 Φ85×250 85/85/64 132
1200 ≥4 Φ95×250 120/120/90 160
1500 ≥4 Φ95×250 150/150/72 200
1800 ≥4 Φ95×250 150/150/72 250
2000 ≥4 Φ100×250 180/180/135 270
3000 ≥3 Φ134×250   315
4000 ≥3 Φ154×250   400
5000 ≥2.5 Φ170×250   450
6000 ≥2.2 Φ188×250   450
: note:the specific technicical parameters are subject to the technical specifications and drawings


 We welcome your inquiry
*************************************************************************************************************************
Jessie
Jiangsu Runlink Marine Technology Co.,Ltd
MP: +86188 88123377
 
   
 
 

Single Tight Lid Ring Bottom

Single Tight Lid Ring Bottom is a component commonly used in paint/candle/glue/chemical tin cans. The diameter is 62mm-85 mm. Rust-proof, corrosion-resistant and can be sealed repeatedly. Coating can be customized. The mold can be customized or adjusted according to customer needs. Use carton + wooden fumigation pallet packaging. Fast delivery.


Single tight lid,Lid Ring Bottom,Components for paint tin can,Single tight accessories for cans,paint cans components

Jiangsu Fast Pack Co., Ltd , https://www.fastmetalpacking.com