Aluminum pipe clamp valve structure characteristics and working principle

Aluminum pipe clamp valve structure features:

Aluminum alloy pipe clamp, also known as aluminum alloy pipe valve, aluminum alloy pipe valve, by the left and right aluminum alloy body, rubber tube sets, the size of the stem, up and down the gate, guide columns and other components. Wear-resistant, anti-corrosion, antifreeze, good sealing performance, as long as the replacement of the rubber sleeve that is intact as new, the valve body can be used permanently, life expectancy is 4-6 times the normal valve. There are manual, pneumatic, electric and other means of driving, but also customized according to customer needs non-standard products.

Aluminum pipe clamp valve works:

When the handwheel clockwise, so that the size of the stem at the same time drive the upper and lower gate, compression tube, to close, reverse that is open, so that the gate in the guide column reciprocating up and down to complete the valve opening and closing work. In addition, the rubber tube sleeve bearing capacity, so the switch, the operator rotates the handwheel as long as the right amount of resistance encountered, have reached the pole open and close, do not try or more than one auxiliary to disable other tools to open and close.

Aluminum alloy pipe clamp valve Scope of application: Chemical, petroleum, power generation, alkali plant, mineral processing, cement, coal preparation, non-metallic industries, can quickly control the concentration of sand pipe flow and the deadline.

Aluminum alloy pipe clamp valve main technical parameters:

1, the use of media: pulp, sewage, slag, cinder, sediment and so on.

2, the temperature: -30-85, higher temperature to be customized.

3, nominal pressure: -0.3-2.5Mpa (Order Description).

4, the implementation of the standard flange: (JB / 80-91).

Aluminum alloy pipe clamp valve main connection size:

Flange