Guidance: Engine coolant has the following features: Prevents rust in the cooling system components and prevents overheating (boiling point higher than water). We need to replace engine coolant regularly. The coolant of the engine is replaced depending on the mileage or time, because it is difficult to visually judge its degree of deterioration.

The coolant may have different concentrations and a water-added coolant may be used, but if it is not the proper concentration, it may be easily solidified. For each area, a suitable concentration of Toyota long-life coolant must be used.

When checking engine coolant level, wait for the engine to cool and check the liquid level in the coolant reservoir. If the liquid level is between the high and low lines on the tank, then the amount of fluid is sufficient. If the liquid level is low, add coolant. With the temperature of the engine, the liquid level in the coolant reservoir also changes.

If the liquid level drops in a short time after adding the coolant, the system may leak. Check radiators, hoses, engine coolant tank caps, radiator cocks, and pumps. If no leakage is found yet, pressurize the cooling system.

At the end of the training session, Car Beauty Wang reminded everyone of the following precautions when replacing engine coolant:

First of all, when replacing the coolant, it should be prevented from leaking to the parts and prevent the hot coolant from hurting people. Secondly, to ensure that the coolant is released, the radiator and the coolant in the cylinder must be released, and no air can remain in the cooling system. The level is added to the standard volume. Third, confirm that there is a leak after the process is completed.

Tomato Paste Production Line

This line includes elevator for fresh tomatoes--tomatoes washing machine--tomatoes sorting machine--preheating machine--tomato pulping machine--vacuum concentration machine- paste sterilization machine--Filling Machine.

We have the automatic production line, and the small semi-automatic processing machines. We can also customize it based on your demands.

1. Preheating Machine: This machine purpose:Increase the temperature of the steam heating the slurry to achieve the purpose of preheating;

2. Pulping Machine: This machine can make juice or paste without peeling the skin of fruits. It can press many kinds of dry fruit such as pineapple, lemon, orange, apple etc. It can remove the residues automatically.

3. Vacuum Concentration Machine: Using the principle of lowering the boiling point under vacuum, the raw materials are subjected to boiling water evaporation treatment to achieve the purpose of extracting high-purity substances.

4. Mixing Tank: Purpose: for fruit pulp ingredients,add sugar and other accessories.

5. Tubular Sterilization: This machine is with PID control system; it is easy to operate.


Tomato Paste Production Line, Tomato Paste Line, Tomato Paste Processing Line, Tomato Sauce Machines

Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com