Model NO.: ZT050D-ZT240D
Acting Type: Double Acting
Material: Aluminum
Customized: Non-Customized
Structure: Rack and Pinion
HS Code: 841239000, 8412390000
Pressure Range: 0.25MPa~0.8MPa
Largest Torque: 8100nm
Trademark: BTRCV
Transport Package: Wooden Case
Specification: ZT050D-ZT240D
Origin: Wenzhou
Model NO.: ZT050D-ZT240D
Acting Type: Double Acting
Material: Aluminum
Customized: Non-Customized
Structure: Rack and Pinion
HS Code: 841239000, 8412390000
Pressure Range: 0.25MPa~0.8MPa
Largest Torque: 8100nm
Trademark: BTRCV
Transport Package: Wooden Case
Specification: ZT050D-ZT240D
Origin: Wenzhou

Product Description

AT pneumatic valve actuator which compact design, long life service, high quality, gear and gear rack.

This product is used for 90° Rotationally valves, such as: Ball vales, butterfly valves, plug valves etc. My company put product

Quality as the first task, adopts the most advance production and technology, strong than similar product on both product quality and performance.

At series air operated actuator is the compact, the life is long, the quality is high, rack's-like air operated actuator.

Pressure range:
Max: 10bar

Acting type: Single or double

Rotate angle: 90 deg

Life of AT pneumatic valve actuator
More than 1 million timeBtrcv Double Acting Pneumatic Actuator
Features 
1. Dual Position Rack 
2. Integrated Design 
3. High Output Power 
4. Integrated Design 
5. Long Service Life 
6. Stainless steel fasteners for long term corrosion resistance 
7. The interface between piston, pinion and body is made of low friction material 
 
Specifications 
1). Pressure Range: Max. Working pressure 10bar 
2). Air pressure: 2.5bar~8bar 
3). Adjustment Range: 90° ± 5° 
4). Ambient temperature: Standard:-20°C(-4°F)to +80° C (+176°F)
High-temperature:-15°C(+5°F)to+150°C(302°F)
Low-temperature:-40°C(-40°F)to+80°C(+176°C)
5). Type: Single-acting (spring return), double-acting 
6). Optional accessories: Solenoid valves, limited switch, electric position 
7). Lubrication: All the moving parts are coated with lubricants, extending their service life 
8). Life Time: One million time 
 
Standards 
A. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO 
5211, the axle assembles orifice according to DIN 3337 
B. Interface between actuator and control valve: 7100 D/S-7350 D/S according to 
NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate 
C. Interface between actuator and signal box: According to VDI/VDE 3845 
 
Introduction 
I. Actuator Body 
The actuator body made of extruded aluminum alloy,manufacture by precision machining center,
its internal and external surfaces are hard anodized for low friction and longer service life.
 
II. The End Cap
The end cap made from high-pressure casting aluminum,surfaced with anti-corrosion thermoplastic coatings
all-in-one compact structure,all single-acting and double acting actuators have similar actuator body and 
cap,changes its acting mode by loading or disassembling spring.
III. Drive Shaft 
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc. 
 
IV. Piston 
Piston material is die-casting aluminum alloy. Maximum torque can be output when the actuator is actuated with certain pressure. 
 
V. Piston Seal 
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements. 
 
VI. Travel Adjustment 
Plus/Minus 5 degree travel can be adjusted through the two bolts. 

Btrcv Double Acting Pneumatic Actuator









 

Product Description

AT pneumatic valve actuator which compact design, long life service, high quality, gear and gear rack.

This product is used for 90° Rotationally valves, such as: Ball vales, butterfly valves, plug valves etc. My company put product

Quality as the first task, adopts the most advance production and technology, strong than similar product on both product quality and performance.

At series air operated actuator is the compact, the life is long, the quality is high, rack's-like air operated actuator.

Pressure range:
Max: 10bar

Acting type: Single or double

Rotate angle: 90 deg

Life of AT pneumatic valve actuator
More than 1 million timeBtrcv Double Acting Pneumatic Actuator
Features 
1. Dual Position Rack 
2. Integrated Design 
3. High Output Power 
4. Integrated Design 
5. Long Service Life 
6. Stainless steel fasteners for long term corrosion resistance 
7. The interface between piston, pinion and body is made of low friction material 
 
Specifications 
1). Pressure Range: Max. Working pressure 10bar 
2). Air pressure: 2.5bar~8bar 
3). Adjustment Range: 90° ± 5° 
4). Ambient temperature: Standard:-20°C(-4°F)to +80° C (+176°F)
High-temperature:-15°C(+5°F)to+150°C(302°F)
Low-temperature:-40°C(-40°F)to+80°C(+176°C)
5). Type: Single-acting (spring return), double-acting 
6). Optional accessories: Solenoid valves, limited switch, electric position 
7). Lubrication: All the moving parts are coated with lubricants, extending their service life 
8). Life Time: One million time 
 
Standards 
A. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO 
5211, the axle assembles orifice according to DIN 3337 
B. Interface between actuator and control valve: 7100 D/S-7350 D/S according to 
NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate 
C. Interface between actuator and signal box: According to VDI/VDE 3845 
 
Introduction 
I. Actuator Body 
The actuator body made of extruded aluminum alloy,manufacture by precision machining center,
its internal and external surfaces are hard anodized for low friction and longer service life.
 
II. The End Cap
The end cap made from high-pressure casting aluminum,surfaced with anti-corrosion thermoplastic coatings
all-in-one compact structure,all single-acting and double acting actuators have similar actuator body and 
cap,changes its acting mode by loading or disassembling spring.
III. Drive Shaft 
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc. 
 
IV. Piston 
Piston material is die-casting aluminum alloy. Maximum torque can be output when the actuator is actuated with certain pressure. 
 
V. Piston Seal 
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements. 
 
VI. Travel Adjustment 
Plus/Minus 5 degree travel can be adjusted through the two bolts. 

Btrcv Double Acting Pneumatic Actuator









 

Heavy Steel Fabrication


Coeffort has been supplying steel equipment, structure manufacturing and Installation service from the year of 2013. We focus on producing the highest quality mechanical steel structures and conveyor equipment with advanced steel fabrication processes and machinery. Our commitment to quality metal products, superior customer service and ability to manufacture and assemble has earned us the trust and recognition from our clients in Australia and Asian countries.


Coeffort's Fabrication Service includes but is not limited to:

  • Structure Engineering Design and Shop detailing services
  • Industrial Conveyors, belt conveyor, Chain Conveyor, Bucket Elevator, Screw Conveyors etc.
  • Solid / Liquid Separation Machine, Thickener and Vacuum Belt Filters
  • Heavy industry workshop building structures
  • Industrial process plant buildings, trusses, trestles.
  • Mining equipment, plate works (chutes, hoppers, bins, tanks etc.)
  • Non-pressure vessel/tanks.
  • Pipe spools fabrication.
  • Steel Structures & Equipment Installation



Our facility and production capabilities include:

  • 15,000 m2 purposed- built Factory.
  • Approximately 50 staff capable of factory work
  • Overheads Cranes with Maximum capacity of 32 Tons, height under the hook of 8m
  • CNC Cutting Machine, Shearing Machine ,Bending & Rolling Machine etc.
  • Shot and Sand Blasting Machine with painting facilities


Quality Control System

We are ISO9001 qualified workshop.

DOC Control as per in-house procedures.

MDR Doc – ITP, Raw Material Traceability, Welding Procedure, Welder Qualification, NDT, Dimension and Trail Assembly Report, Painting Inspection, are our standard QA docs.

Welding Quality Control

Welding Standard: AWS D1.1, AWS D1.6, or other International Standard

Welder Qualification: certified as per AWS

AWS Certified Welding Inspector (CWI)

Painting Quality Control

We have contracted Painting inspector with NACE II qualification to guarantee painting surface preparation and painting quality.


Our aim is to be a leading customized steel equipment manufacturing supplier in China through our strict QA systems.



Our Facility

Facility 1


Heavy Steel Fabrication,Steel Building Fabrication,Steel Bridge Fabrication,Steel Duct Fabrication

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.ycectech.com