 Application
 Main technical parameters
 Nominal diameter:  60mm,  100mm,  150mm.
 Static load with a measurement upper limit of 3/4, alternating load.
 Working pressure: use up to 2/3 of the upper limit of the measurement.
 Measured upper limit
 Coupling nut
 M14 x 1.5, M20 x 1.5
 A quarter of the PF (PT, NPT)
 PF (PT, NPT) 1/2
 Spring tube
 SUS304,SUS316L
 Connector material SUS304,SUS316
 movement
 SUS304
 The trim SUS304
 Gauge glass Ordinary glass, tempered glass
 We produce all types of pressure gauges, welcome to consult and
purchase.
 Use guide
 Protective devices should be added to the environment where there
is a sharp pressure change or vibration and pulsation.
 Pressure gauges should be installed horizontally or vertically.
 Do not use the hand to pull the meter case when mounting or
disassembling.
Use a special wrench.
 The measurement of explosion hazard, easy crystallization, easy
solidification, corrosion resistance, please select a special quality
measuring instrument.
 A pressure gauge with an oil seal shall be used to measure oxygen,
acetylene or other combustible gases.
to the degree is not more than 85%.Â
Â
| Dia: | Â |
φ60mm,φ100mm,φ150mm  |
||||
| Working pressure: |  | The pressure gauge should not exceed 3/4 of the maximun scale value under steady pressure and not exceed 2/3 of the maximum scale value under fluctuation pressure and not exceed 1/3 of the maximum scale value under shori-time pressure. |
||||
|
Connection Thread  |
 | M14×15,M20x15 PF(PT,NPT)1/4 ,PF(PT,NPT)1/2 |
||||
| Â | ||||||
| Â | ||||||
| Damping Liquid: |  | methy silicone | ||||
| Bourdon tube: |  | sus304 or sus316 | ||||
| Connection material: |  | sus304 or sus316 | ||||
| Welding way: |  |  | TIG |  |  | |
| Movement: | Â | Â | SUS304 | Â | Â | |
| Â | Casing: | Â | Â | SUS304 | Â | Â |
|  | Glass: |  | PC, stalinite, double pane safet | |||
| Model | Pressure Range(MPa) | |||||
| YTN-60H(Z/ZT) | 0~(0.16/0.25/04/0.6/1/1.6/2.5 4/6/10/16/25/40/60) 01~(015/0.3/0.5/0.9/15/24) |
|||||
| YTN-100H(Z/ZT)Â Â Â Â Â Â Â Â Â Â Â YTN-1500H(Z/ZT) | 0~(0.1/0.16/0.25/04/0.6/1/1.6/2.5/ 4/6/10/16/25/40/60/100) 01~(0/0.15/0.3/0.5/0.9/1.5/24) |
|||||
| Accuracy(%) | ConnectionThread | Â | Â | Â | ||
| 2.5 | M14×1.5 |  |  |  | ||
| Â | Â | Â | ||||
| Â | Â | Â | ||||
| 1.6 | M20×1.5 |  |  |  | ||
| Â | Â | Â | ||||
| Â | Â | Â | ||||
 Please select the pressure gauge correctly.
 Please send us the following details:
 - nominal diameter 40/50/60/100/150/200/250mm
 - precision grade
 - coupling nutÂ
 -MPa/ KGF /cm² /Psi/bar/mmH2O
 - meter dial - standard single scale/non-standard double scale
 - measuring rangeÂ
 - installation method - radial installation or axial installation
 - structural patternÂ
 - whether the measuring medium is corrosive, easy to be not explosive,Â
easily not flammable, gas or liquid
 - installation environment - no vibration
 - damping fluid - no fill, silicone oil filling or glycerine filling
 - environmental temperatureÂ
 -medium temperature
 - is shock?
 - instructions - site indication or remote control
 - switching control mode - upper and lower limit control, double upperÂ
limit control or dual lower limit control
 - control voltage -AC220V/AC380
 - contact selection - normal contact 10va/ magnetic contact 30va or
dry reed contact DC24V
 - instrument glass - common instrument glass, tempered glass, PC glassÂ
or safety laminated glass
 - table cover - iron shell spray or SUS304 stainless steel shell
 - elastic element material - tin phosphor bronze, SUS304 or SUS316
 - connector material - bronze hp59-1, SUS304/SUS316
 - other description
 Details of the products produced by our own factory.
 There are advanced pressure detector and careful worker,Â
the quality is assured, please feel free to order.
 One of three biggest pressure gauge manufacturers in ChinaÂ
established in 1987.
 Specializes in manufacturing and exporting Pressure gauge,
Pressure regulator, Manometer and Pressure thermometer.Â
 We have a strong network that allows us to design and customizeÂ
products.
 We currently produce over 8 varieties, more than 100 series,Â
and about 1, 000 specifications of instruments for various industriesÂ
including oil exploration, chemical industry, chemical fiber industry,Â
iron and steel industry, metallurgical industry, power generation
plants, food industry and scientific research.Â
 Our products are exported to East Asia such as Korea & Japan, theÂ
European Union such as Russia, Germany & Italy,and the Middle East,Â
America. Southeast Asia such as Vietnam, Thailand & Indonesia.Â
 Our company's main partners: Italian TER. MA. DEN. SNC, South Korea,Â
Germany WIKA, China's Haier.Â
 As a well-known manufacturer in China, our factory has approved byÂ
CCC, ISO14001, ISO9001, CE, SGS and KS certificates.Â
 We will unswervingly make more efforts to supply competitive productsÂ
and the best services to all customers.Â
 If you need high quality products, wecome to contact us.Â
 Once cooperation, friends forever.
Â
A driving bevel gear flange assembly comprises a flange body and a dust cover flange body comprises a connecting flange and a conical cylinder body. The connecting flange end face is arranged on the end tooth shape,the inner wall is arranged on the first conical surface of the end tooth shape is arranged on the through hole:the conical cylinder outside the wall is arranged in turn on the second conical surface,boss,boss and sealing face of the screw thread sealing surface is arranged on the rounded corner;A first notch,a tooth shape and a second groove through the first circular Angle transition connection of the dust cover is provided with a thread segment installation and disassembly is convenient
Articulated Flange For Bevel Gear,Flange For Bevel Gear,Gearbox Flange Shafts,Gearbox Bearing Flange
Jilin Province Xuan Yi Trading Co.,Ltd. , https://www.jlxytruckparts.com