Item number: HY200ZH-3A
Engine type ZHONGSHEN
Engine single cylinder, 4-stroke, air cooled
Bore× Stroke 63.5× 62.2
Working volume 196.9CC
Nominal displace 200CC
Compression Ratio 9.0/1
Starter system electric/kick
Ignition Model C. D. I.
Advance angle of ignition BTDC11± 2° (≤ 1500) 33.5± 2° (≥ 4000)
Way valve underneath type camshaft
Lubricating system pressure splash
Engine net weight 32kg
Engine dimension 354× 324× 435mm
Maximum power(kw/rpm) 10.2/7500
Maximum torque(N. M/rpm) 14/6000
Fuel consumption ≤ 354
Low idling speed 1500
Exhaust pollution CO≤ 3.8%, HC≤ 800ppm
Starting ability ≤ 15s
Clutch type Wet Multi-Plate
Derailleur type Regular meshing gear type
Transmission ratio, junior 3.333
Output sprocket teeth 15
The capacity of lubricating oil 1.1L
Carburetor PZ30
Spark plug D8RTC
Lubricating oil pump Internal and external rotor
Magnetor type Permanent magnet AC
Tricycle Data
Dimension 4200× 1300× 1150mm
Net Weight 400kg
Max. Load capacity 700kg
Max Speed 60km/h
Transmission Type shaft
Front wheel 4.5-12 Rear wheel 4.5-12

The water-cooled chiller uses the shell and tube evaporator to exchange heat between the water and the refrigerant. The refrigerant system absorbs the heat load of the water and cools the water to produce cold water. Then, the heat is transferred to the shell and tube condenser by the compressor. The refrigerant exchanges heat with the water, so that the water absorbs the heat and takes the heat out of the external cooling tower through the water pipe to dissipate (water cooling))

Box-Type Water Cooled Chiller

Box-Type Water Cooled Chiller,Box-Type Water Chiller Unit,Box-Type Water Cooling Chiller Machine,carrier water cooled chiller, trane water cooled chillers, water cooled chiller diagram, industrial water chiller system

Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com