The highest tolerance for plastic Parts will be in ± 0.01mm.
Production process:
The first, saw the workblank by sawing machine, make surface by milling machine, clean burrs in the cavity by CNC machine, then correct internal stress to avoid shape deformed.
The last, clean the half finished product, and then gold plated. And check all size.
Besides, If you need sample, please kindly provide your drawings to us. We will offer sample testing report for your confirmation before we send the sample. The report will write all actual size according to your drawing, so you could check the size, if the actual size doesn't within your tolerance, we will re-make sample. Only getting your agreement, we will send sample to you! So that, you will never worry about receiving bad sample, because you can control the quality!
What can we do?
Our products is widely used for hardware, plastics, electric products, medical equipment, optical communication, automobile and machinery etc of industry. And experience in processing all kinds of materials, such as AL6061/7075, KOVAR, 17-4PH, ESD225/420, DERLIN, S136H, SS440C, SKD11/SKH51, ceramic, Carbide, , SUS303/304, PEEK and so on. Besides, we provide some specific processing like specific hot-processing, specific electroplating, specific surface finish etc. Such as optical grinding, honing, precision EDM special-shaped processing, carburization, nitriding, vacuum heat treatment, low temperatures processing, hard anodizing for Aluminum parts, steel bluing, electrolytic polishing, electroless nickel plating, silver plating, gold plating, DLC, titanize, black chromium plating.
What can we do for you?
Pre-sale service:
We will arrange a professional salesman for deal with your technical requirements and precision requirements, and then according to product drawing and our factory production capacity, we will offer you a most competitive price based on the quickest and least cost ( if we can't offer the size in your need, we will inform you before offering. ), so that start to cooperate with you.
On-purchase service:
Once we reached agreement and clear producing details, we will arrange a engineer for auditing the drawing and planing the production. In the producing, production assistant will continually inform the salesman about production progress and quality information, ( during in this time, we will control quality strictly), and the salesman will inform all information to you, to insure deliver goods on time and quality assured.
After-sales service:
Since the company began, we always understand every part is very important for customer, even though lack one part or a bad product may make all system can't work well, so quality is life for us. Because all parts are precision, so it must be professional. Perhaps there are some bad products could be made, but according to customer's feedback, we will check problem and remake them in time. At the same time, in order to avoid the bad products are made again, we will improve the way of producing.
Here is our Chinese free hotline: 400-809-2678, feel free to call this number, if you are in China!
More details about Mold Spare Parts, pls feel free to contact me.
                                    Equipment List
|
Welded Bed Plate For Flanges Of Ship Pipe
The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes.
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.
Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com