Recently, the Zhejiang “Eastern Angels†Carnival 2015 hosted by Dongfeng Commercial Vehicle Co., Ltd. was held in Hangzhou and Taizhou. In the later period, this activity will also be carried out in areas such as Shaoxing and Ningbo.
Dongfeng Cummins Helps “East Wind Messenger†Enter Zhejiang
Nearly 100 customers engaged in the transportation of bulk cargoes came to the site during the Hangzhou Station event. After the national IV knowledge and driving skills training and written examinations and assessments, there were 20 drivers who entered the driving game in the final match. After a fierce battle, driver Li won the championship with a score of 160 points.
Dongfeng Cummins Helps “East Wind Messenger†Enter Zhejiang
During this activity, the majority of drivers had a better understanding of the basic knowledge of the National IV vehicle. Through the test drive session, they experienced the good performance of the Dongfeng Cummins IV engine.
It is understood that the performance of the Dongfeng Cummins ISB180 40 engine has advantages in all aspects. In terms of fuel consumption, it uses the DENSO high pressure common rail fuel system with a global sales volume of more than 10 million sets. The injection pressure industry is the highest, up to 1800 bar, and the fuel atomization is good. In-cylinder combustion is sufficient, with an average fuel consumption drop of more than 5%. The advanced oil and water treasure device is specially designed to meet the requirements of different domestic oil products. It adopts one-step coarse filtering of the whole vehicle and two-stage fine filtration of the engine to remove impurities in the fuel, greatly improving the reliability and durability of the fuel system, and ensuring the engine. Reliable and stable work. At the same time, the power is more effectively upgraded. The advanced DENSO fuel system enables the engine's low-speed dynamic performance to increase by an average of about 10% over the mechanical type III products, and still has a strong power at full load, followed by a B-series engine with a market occupancy of more than 7 million units. Up to 80% common parts, more convenient maintenance. The KD2H vehicle sales of the Dongfeng Cummins ISB180 40 were met at the event site and won the unanimous approval of customers.
Chlorinated Polyethylene(CPE)
1. CPE is a kind of saturated rubber, which has excellent heat-resistant oxygen aging, ozone aging, acid and alkali resistance, and chemical resistance.
2. CPE has general oil resistance. Among them, it has excellent resistance to ASTM No. 1 oil and ASTM No. 2 oil, which is equivalent to NBR; and it has excellent resistance to ASTM No. 3 oil, which is better than CR and is equivalent to CSM.
3. CPE contains chlorine element, has excellent flame retardant performance, and has the characteristics of burning and dripping. It can be combined with antimony flame retardant, chlorinated paraffin, and Al(OH)3 in an appropriate ratio to obtain a flame retardant material with excellent flame retardancy and low cost.
4. CPE is non-toxic, does not contain heavy metals and PAHs, and it fully meets environmental protection requirements.
5. CPE has high filling performance and can be manufactured to meet various performance requirements. The processing performance of CPE is good, and the Mooney viscosity is available in a variety of grades between 50-100.
CPE 135A, Chemical Chlorinated Polyethylene,Modifier Chlorinated Polyethylene,Cpe Chlorinated Polyethylene
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com