Trough feeder
The trough type feeder can be erected on the ground or hoisted at the discharge port of the mine bin. The bottom plate of the tank is reciprocated, and the stroke is 20-60 times/min, and the stroke is 20-200 mm. The stroke can be appropriately adjusted by the eccentric of the drive, with the eccentricity being half of the stroke. According to some practices beneficiation plant, for viscous ore, eccentricity of not less than 30mm. The tank width of the trough feeder is about 2-2.5 times the maximum particle size of the feed. Maximum chute feeder, to meet the particle size of less than 500mm of iron ore to ore. The most commonly used specification is the 980*1240 trough feeder with a feed size of 350-0mm, which is suitable as a feeding device for the 400*600 jaw crusher .
Changzhou Cewoo Equipment Co.,Ltd , https://www.cewoocut.com