Easy Clean and Maintenance Twin Screw Extruder

Basic information

Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.

Principle

After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of  screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.

Features:

Screw segments and kneading blocks are designed and manufactured to be uniform meshing clearance (radically, axially and normally) between both two screw-shafts and screw-shafts to barrel during operation by 3D-CAD&CAM. Distribution-Mixing and Dispersion-Mixing perfect and homogeneous. Self-wiping and no solidified particle.

Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.

Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precisely machined. Excellent performance, and long lifetime.

The barrel is designed with efficient heating/cooling system. Temperatures of multiple zones are precisely controlled within ±2ºC.

Gear box is designed with high-torque, low-noise, with torque limiter (opinion).

Centralized lubricating and oil temperature control/alarm system.

Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.

PLC and HMI are used for control with friendly interface, easy to operate.

All processing parameters are recipe-mode managed (data storage, recall and modify), and monitored by the production controller in office terminal or mobile terminal.

Comprehensive safety protection system.

Easy clean and maintenance

High reliability

Over View of Our Factory:
Brief Introduction
MAPLE MACHINE (MPM tek) was established in 2006. Since 2009, MPM tek commences to R&D and manufacture the POWDER COATING PROCESSING EQUIPMENT (machines and production lines) professionally.
 
MPM tek owns a high-level engineering team who masters advanced technology and design theory of PRE-MIXER, EXTRUDER, ACM GRINDING SYSTEM, POST-MIXER, and POWDER COATING PROCESSING LINE.
 
The Product of MPM tek wins the praises from not only powder coating manufacturers but also processing equipment manufacturers for the reasons of QUALITY, RELIABILITY and PERFORMANCE PRICE RATE.
 
The Design and Construction of Product of MPM tek, such as MIXER, EXTRUDER, COOLING BAND and ACM MICRO-GRINDING SYSTEM, are in conformity with European Directives (LOW VOLTAGE 2006/95/EC and MACHINES 2006/42/EC), and have been obtained CE MARK.
 
MPM tek provides the PRESSURE SHOCK RESISTANT TO 11 bar (PSR11) ACM MICRO-GRINDING SYSTEM designed and manufactured according to the STANDARDS ON PRESSURE SHOCK RESISTANT VESSELS AND APPARATUES ANDPRESSURE VENTING OF DUST EXPLOSIONof both GB and EN.
 
Safety, Automation, Cost Saving , Environment Protection and perfect After-Sales Service are our tenets for the R&D, manufacturing and sales of powder coating processing equipment, also the promise to our customers.



  Basic information

Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.

Principle

After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of  screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.

Features:

Screw segments and kneading blocks are designed and manufactured to be uniform meshing clearance (radically, axially and normally) between both two screw-shafts and screw-shafts to barrel during operation by 3D-CAD&CAM. Distribution-Mixing and Dispersion-Mixing perfect and homogeneous. Self-wiping and no solidified particle.

Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.

Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precisely machined. Excellent performance, and long lifetime.

The barrel is designed with efficient heating/cooling system. Temperatures of multiple zones are precisely controlled within ±2ºC.

Gear box is designed with high-torque, low-noise, with torque limiter (opinion).

Centralized lubricating and oil temperature control/alarm system.

Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.

PLC and HMI are used for control with friendly interface, easy to operate.

All processing parameters are recipe-mode managed (data storage, recall and modify), and monitored by the production controller in office terminal or mobile terminal.

Comprehensive safety protection system.

Easy clean and maintenance

High reliability

Over View of Our Factory:
Brief Introduction
MAPLE MACHINE (MPM tek) was established in 2006. Since 2009, MPM tek commences to R&D and manufacture the POWDER COATING PROCESSING EQUIPMENT (machines and production lines) professionally.
 
MPM tek owns a high-level engineering team who masters advanced technology and design theory of PRE-MIXER, EXTRUDER, ACM GRINDING SYSTEM, POST-MIXER, and POWDER COATING PROCESSING LINE.
 
The Product of MPM tek wins the praises from not only powder coating manufacturers but also processing equipment manufacturers for the reasons of QUALITY, RELIABILITY and PERFORMANCE PRICE RATE.
 
The Design and Construction of Product of MPM tek, such as MIXER, EXTRUDER, COOLING BAND and ACM MICRO-GRINDING SYSTEM, are in conformity with European Directives (LOW VOLTAGE 2006/95/EC and MACHINES 2006/42/EC), and have been obtained CE MARK.
 
MPM tek provides the PRESSURE SHOCK RESISTANT TO 11 bar (PSR11) ACM MICRO-GRINDING SYSTEM designed and manufactured according to the STANDARDS ON PRESSURE SHOCK RESISTANT VESSELS AND APPARATUES ANDPRESSURE VENTING OF DUST EXPLOSIONof both GB and EN.
 
Safety, Automation, Cost Saving , Environment Protection and perfect After-Sales Service are our tenets for the R&D, manufacturing and sales of powder coating processing equipment, also the promise to our customers.



 

Ultra Fine Grinder

Super fine grinder consists of pulverizing system, prticle grading system, cyclone separating system, dust collecting system and electric control box.
Feeding material via hopper by screw conveyor. The material is sheared and pulverized by high speed cutters and liner, then pulverized material moves to the cyclone separator and discharge, dust is filtrated and collected by the filter cylinder.

Ultra Fine Grinder,Super Fine Grinder,Ultra Fine Mill,Super Fine Mill

Changzhou Lead Machinery Technology Co.,Ltd , https://www.leaddryer.com