After the oil of the bulk feed truck has been used for a period of time, due to some of its own impurities caused by the operation of the machinery and external contamination, some of the parts that are operated will have worn out metal shavings, and When the parts are subjected to some corrosive effects, they form metal salts that eventually deteriorate the oil in the bulk feed carrier. Some drivers are usually busy when transporting goods, and the knowledge of this piece is not enough, then it is prone to oil deterioration and accelerated aging, resulting in deterioration of the oil of bulk feed carriers. Can not get a good lubrication performance, which will accelerate the vehicle parts of the various parts of the degree of wear. Therefore, every driver of a bulk feed carrier should have a better understanding of and knowledge about the proper use of vehicle oil, and he must also be able to change the oil.
1, after a long period of driving the bulk feed carrier, you can remove the oil, drop it and rub it in your hands. If there is some abnormal taste, then it proves that the oil has gone bad.
2. Take a few drops of the extracted oil to the litmus test paper, and then carefully observe some changes in the test paper. If the litmus paper has turned red, then you need to replace the oil. Now.
3. If the bulk feed truck is in use, there are obvious lubrication conditions or there are many bubbles, and the foam will not disappear so easily, it proves that the oil in the bulk feed truck is already With the incorporation of water, the vehicle's engine oil deteriorated.
Usually when driving a bulk feed carrier, it is also possible to determine whether the engine oil has deteriorated through the degree of oil consumption. If the oil is mixed with water or diesel, the degree of consumption of the oil will increase or decrease. The emergence of these problems proves that the oil of the bulk feed truck has deteriorated, and it is necessary to replace the new oil immediately. .
These control valves play a crucial role in ensuring the efficient and effective operation of water treatment systems.
Filter valves are responsible for controlling the filtration process, which removes impurities and particulate matter from the water. They can be further classified based on their control methods, such as manual, semi-automatic, or fully automatic.
Softening valves, on the other hand, are designed to remove hardness-causing minerals like calcium and magnesium from the water. They can be categorized based on the number of tanks controlled by a single valve, such as single tank or multi-tank systems.
Additionally, softening valves can be classified based on the automatic regeneration method used. This includes time-based regeneration, meter-based regeneration, or demand-initiated regeneration.
The flow direction of the regeneration liquid is another factor that determines the type of softening valve. It can be either downflow, upflow, or counter-current flow.
The control method of softening valves refers to how the valve is operated and controlled. It can be manual, semi-automatic, or fully automatic, depending on the level of automation and control desired.
In industrial applications, softening valves are commonly used for treating boiler feed water. The removal of hardness-causing minerals helps prevent scale formation and improves the efficiency and lifespan of the boiler.
Filter Control Valve,Automatic Softener Valve,Manual Control Valve,Softener Control Valve
Hebei Chengda Water Technology Co.,Ltd. , https://www.arclionchengda.com