1.Technical information:
Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP.Â
The machine bends the materials into different angles by heating up the materials with single or multi tube heaters.Â
This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result,Â
highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves.Â
1.When bending,the heater can shift and interrupt power supply. To make the material cooling and shaping more rapidly,
save more energy,operation more reasonable and humanity.
Â
2.Automatically water cooling system,can make the machine has the line heating function.
Â
6..The machine with special Double leakage automatic protection function, safety in use.
Â
7.Integration of high strength of frame, stable performance, convenient for transportation and installation.
Â
8.Wide usage: the machine can process acrylic board; ABS board; PVC board; Sunshine board and etc.
Â
9.Automatic bending function.can bend automaticly according to plate requirements to.cool and finalize the design after bending, then flap plate to return.Remove bended workpiece. Fully realized automation.
3.Machine picture:
4.Bending machine detail:
5.Factory:
Â
| Model | BZG-1000-Z | BZG-1200-Z | BZG-2400-Z |
| Power | 2KW | 2KW | 3KW |
| Effective bending width | 1000MM | 1200MM | 2400MM |
| Voltage | 220VÂ Â 50HZ | ||
| Effective bending length | no restrict | ||
| Maximum heating temperature | 650 degree | ||
| Bending Angle | The 0-179 degree arbitrary adjustable | ||
| Bending Type | Acute Angle,Round arc for choice | ||
| Each corner bending time | 7-12 seconds | ||
| Material thickness | 0mm-8mm | ||
| Mould press lever working way | pneumatic | ||
| Mould press lever pressure | 0KG-150KG | ||
| Mould press lever working speed | 1''-10''/time(adjustable) | ||
| Maximum volume of water tank | 30L | ||
| Applicable industry | plastic material bending | ||
1.Technical information:
Bending machine is widely used for bending the materials like acrylic, plastic, PC, PVC and PP.Â
The machine bends the materials into different angles by heating up the materials with single or multi tube heaters.Â
This machine is fast and precise. Working plateforms are cooled by water cooling system for the best result,Â
highest efficiency and precise angle forming. The adjustable temperture works out for different materials correctly without over heating causing bubbles and undesirable curves.Â
1.When bending,the heater can shift and interrupt power supply. To make the material cooling and shaping more rapidly,
save more energy,operation more reasonable and humanity.
Â
2.Automatically water cooling system,can make the machine has the line heating function.
Â
6..The machine with special Double leakage automatic protection function, safety in use.
Â
7.Integration of high strength of frame, stable performance, convenient for transportation and installation.
Â
8.Wide usage: the machine can process acrylic board; ABS board; PVC board; Sunshine board and etc.
Â
9.Automatic bending function.can bend automaticly according to plate requirements to.cool and finalize the design after bending, then flap plate to return.Remove bended workpiece. Fully realized automation.
3.Machine picture:
4.Bending machine detail:
5.Factory:
Â
| Model | BZG-1000-Z | BZG-1200-Z | BZG-2400-Z |
| Power | 2KW | 2KW | 3KW |
| Effective bending width | 1000MM | 1200MM | 2400MM |
| Voltage | 220VÂ Â 50HZ | ||
| Effective bending length | no restrict | ||
| Maximum heating temperature | 650 degree | ||
| Bending Angle | The 0-179 degree arbitrary adjustable | ||
| Bending Type | Acute Angle,Round arc for choice | ||
| Each corner bending time | 7-12 seconds | ||
| Material thickness | 0mm-8mm | ||
| Mould press lever working way | pneumatic | ||
| Mould press lever pressure | 0KG-150KG | ||
| Mould press lever working speed | 1''-10''/time(adjustable) | ||
| Maximum volume of water tank | 30L | ||
| Applicable industry | plastic material bending | ||
When we need some water in this new era, we don't need to find a well any more and we just need to turn on the water tap. Therefore, there are more and more kinds of the faucet and more and more people sell water cock, so do we. We sell the water swivel which is used for bathroom, kitchen and hotel, and the taps we sell are mostly made from stainless steel 201 and 304. Besides, we sell the pull-out faucet also, it's getting popular in normal family because it's more convenience.
Water Tap,Bathroom Faucet,Faucet For Bathroom Sink,Faucet Single Hole
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.huiyehardware.com