| material | Grade AÂ Â Wc-10 tungsten carbide alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc |
| The index of hardness | HRC62-65,the service life of 5-6 times longer than the nitrided one |
| Characteristics of alloy powder | High wearing resistance,high corrosion resistance and high temperature resistance |
| Apply to | Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic |
| material | Grade BÂ Ni-20 Ni-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc |
| The index of hardness | HRC60-63,the service life of 4-5 times longer than the nitrided one |
| Characteristics of alloy powder | High corrosion resistance,high wearing resistance and high temperature resistance |
| Apply to | PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc |
| material | Grade C Fe-30 Fe-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Fe,C,Si,Cr,B,Mo,Ni, Co,etc |
| The index of hardness | HRC59-61,the service life of 3-5 times longer than the nitrided one |
| Characteristics of alloy powder | Wearing and corrosion resistance |
| Apply to | Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc |
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
| material | Grade AÂ Â Wc-10 tungsten carbide alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc |
| The index of hardness | HRC62-65,the service life of 5-6 times longer than the nitrided one |
| Characteristics of alloy powder | High wearing resistance,high corrosion resistance and high temperature resistance |
| Apply to | Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic |
| material | Grade BÂ Ni-20 Ni-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc |
| The index of hardness | HRC60-63,the service life of 4-5 times longer than the nitrided one |
| Characteristics of alloy powder | High corrosion resistance,high wearing resistance and high temperature resistance |
| Apply to | PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc |
| material | Grade C Fe-30 Fe-based alloy |
| Processing range | Inner diameter : φ16mm-φ450mm ,effective length to 9000mm |
| Processing technic | Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side |
| Alloy powder composition | Fe,C,Si,Cr,B,Mo,Ni, Co,etc |
| The index of hardness | HRC59-61,the service life of 3-5 times longer than the nitrided one |
| Characteristics of alloy powder | Wearing and corrosion resistance |
| Apply to | Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc |
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
Plasma arc cutting machine cutting technology is the processing of metal materials by plasma machine.
Plasma cutting is using high temperature plasma arc heat to the metal part of the workpiece incision or partial melting (and evaporation), a method of processing and through the plasma momentum ruled out the molten metal to form incision.
|
X Working Area |
1300mm |
|
Y Working Area |
2500mm |
|
Lathe bed |
Steel structure |
|
Cutting speed |
0-10000mm/min |
|
Travelling speed |
0-20000mm/min |
|
Voltage and Frequency |
380V/50Hz |
|
Drive motor |
M542 Stepper |
|
Interface |
USB |
|
Arc starting way |
Contactless arc starting |
|
Driving mode |
Gear wheel |
|
Highly of Z axis |
Air automatic adjust hight controller |
|
Plasma power source |
USA import Hypertherm 65A |
|
Cutting thickness (stainless steel) |
0.3-3mm |
|
Transmission |
Square guide rail for 3 axis; gear wheel |
|
Software |
Wentai V9 |
|
Control system |
DSP for plasma |
|
Packaging size |
3300*2200*1650mm |
Plasma Cutting Machine,Waterjet Cutting Machine,Hypertherm Plasma Cutter,Glass Tube Cutting Machine
JINAN HT MACHINERY CO.,LTD , https://www.jncncrouter.com